[Thu Jun 20 00:50:08 2013] Detection parameters:
  Position = (257.4, 122.0) = 11 51 17.23 -29 2 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 19.2
  Background counts = 125.8
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 13.14'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Thu Jun 20 00:51:16 2013] source mask rpix=3.0, npix_max = 48, mask sum = 37, frac = 0.760
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 13.00"
[Thu Jun 20 00:51:20 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46.ximg exists
[Thu Jun 20 00:51:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46.csv
[Thu Jun 20 00:51:20 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu Jun 20 00:51:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46.csv
[Thu Jun 20 00:51:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:22 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu Jun 20 00:51:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Jun 20 00:51:22 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Jun 20 00:51:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu Jun 20 00:51:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:12 2013] Warning, spatial fit 46 centroid is now closest to src. 86
[Thu Jun 20 00:52:12 2013] Source 49 is offset by -0.565008 and 7.901236 pixels which is larger than
2 X fitted extent = 1.490106 x 1.490106, not incorporating fit results
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:59 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Thu Jun 20 00:52:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 37, frac = 0.760
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 13.00"
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45.csv
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45.csv
[Thu Jun 20 00:53:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:04 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Jun 20 00:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45.csv
[Thu Jun 20 00:53:04 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Jun 20 00:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45.csv
[Thu Jun 20 00:53:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:37 2013] Warning, spatial fit 45 centroid is now closest to src. 89
[Thu Jun 20 00:53:37 2013] Source 49 is offset by 0.538187 and 5.162684 pixels which is larger than
2 X fitted extent = 1.522791 x 1.522791, not incorporating fit results
[Thu Jun 20 00:53:37 2013] Source 49 is offset by -0.826456 and 1.708477 pixels which is larger than
2 X fitted extent = 1.540920 x 1.540920, not incorporating fit results
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:24 2013] XMMSAS src. selection expression = ellipse(22341.460297, 10563.791489, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:54:24 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src.reg
[Thu Jun 20 00:54:24 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (220, 84) - (295, 159)
[Thu Jun 20 00:54:24 2013] XMMSAS bgd. selection expression = annulus(22341.460297, 10563.791489, 1087.500000, 2175.000000, X, Y) && !ellipse(23012.476471, 10739.194008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.856934, 11859.909088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24972.716461, 12490.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21417.110519, 10889.521103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.874573, 11304.905746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.315918, 11128.269302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21410.154343, 10180.531372, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:54:24 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49.gif
[Thu Jun 20 00:55:01 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.evt exist, delete to re-create
[Thu Jun 20 00:55:01 2013] Mean detx,y = (-10353.97, 14020.03) 
[Thu Jun 20 00:55:01 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.img exist, delete to re-create
[Thu Jun 20 00:55:01 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.pi exist, delete to re-create
[Thu Jun 20 00:55:01 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Jun 20 00:55:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu Jun 20 00:55:01 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 00:55:57 2013] rmf not generated due to insufficient counts
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49.arf exists, delete to re-create
[Thu Jun 20 02:46:58 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:46:58 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 729.00
[Thu Jun 20 02:46:58 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1910.00
[Thu Jun 20 02:46:58 2013] Got source and background scale factors 772978.000000, 1661562.000000
[Thu Jun 20 02:46:58 2013] User source parameters:
  Position = (257.4, 122.0) = 11 51 17.23 -29 2 56.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -159.6 +/- 28.0
  Background aperture counts = 888.6
  Rate = -0.002 +/- 0.0003

[Thu Jun 20 02:46:58 2013] Updating counts from extracted products
[Thu Jun 20 02:46:58 2013] Set source signif. to -159.55/29.81 = -5.35
[Thu Jun 20 02:47:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:12 2013] Using photon index=1.80, rate=-0.00169, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49.arf
[Thu Jun 20 02:47:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:12 2013] Updated flux is not positive, keeping original flux
[Thu Jun 20 02:48:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete