[Thu Jun 20 00:50:05 2013] Detection parameters:
  Position = (129.0, 194.3) = 11 51 59.76 -28 57 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.3 +/- 22.9
  Background counts = 137.7
  Rate = 0.002 +/- 0.0002

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 14.42'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Thu Jun 20 00:51:16 2013] source mask rpix=3.1, npix_max = 52, mask sum = 30, frac = 0.568
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.64"
[Thu Jun 20 00:51:19 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24.ximg exists
[Thu Jun 20 00:51:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24.csv
[Thu Jun 20 00:51:19 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Jun 20 00:51:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24.csv
[Thu Jun 20 00:51:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 20 00:51:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:12 2013] Warning, spatial fit 24 centroid is now closest to src. 78
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:59 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Thu Jun 20 00:52:59 2013] source mask rpix=3.1, npix_max = 52, mask sum = 30, frac = 0.568
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.64"
[Thu Jun 20 00:53:02 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 20 00:53:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23.csv
[Thu Jun 20 00:53:02 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 20 00:53:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23.csv
[Thu Jun 20 00:53:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:04 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 20 00:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 20 00:53:04 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 20 00:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 20 00:53:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:36 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 18.013460 pixels away
[Thu Jun 20 00:53:37 2013] Source 27 is offset by -1.884741 and -3.791281 pixels which is larger than
2 X fitted extent = 1.553991 x 1.553991, not incorporating fit results
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:23 2013] XMMSAS src. selection expression = ellipse(11172.941498, 16855.528580, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:54:23 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src.reg
[Thu Jun 20 00:54:23 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (91, 157) - (166, 232)
[Thu Jun 20 00:54:23 2013] XMMSAS bgd. selection expression = annulus(11172.941498, 16855.528580, 1087.500000, 2175.000000, X, Y) && !ellipse(10585.317139, 19153.350235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10749.635574, 18193.221283, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:54:23 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27.gif
[Thu Jun 20 00:54:42 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Thu Jun 20 00:54:43 2013] Mean detx,y = (-17969.39, 3998.76) 
[Thu Jun 20 00:54:43 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Thu Jun 20 00:54:43 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Thu Jun 20 00:54:43 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 20 00:54:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 20 00:54:43 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 00:55:57 2013] rmf not generated due to insufficient counts
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Thu Jun 20 02:46:49 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:46:50 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 605.00
[Thu Jun 20 02:46:50 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 2878.00
[Thu Jun 20 02:46:50 2013] Got source and background scale factors 851666.000000, 4621656.000000
[Thu Jun 20 02:46:50 2013] User source parameters:
  Position = (129.0, 194.3) = 11 51 59.76 -28 57 35.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.7 +/- 25.6
  Background aperture counts = 530.3
  Rate = 0.0008 +/- 0.0003

[Thu Jun 20 02:46:50 2013] Updating counts from extracted products
[Thu Jun 20 02:46:50 2013] Set source signif. to 74.65/23.03 = 3.24
[Thu Jun 20 02:47:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:11 2013] Using photon index=1.80, rate=0.000792, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27.arf
[Thu Jun 20 02:47:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:11 2013] Updating source flux to 9.6e-15
[Thu Jun 20 02:48:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete