[Thu Jun 20 00:50:02 2013] Detection parameters:
  Position = (297.4, 151.2) = 11 51 3.94 -29 0 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1558.7 +/- 51.8
  Background counts = 185.3
  Rate = 0.02 +/- 0.0005

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 10.68'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 11.77"
[Thu Jun 20 00:51:16 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.77"
[Thu Jun 20 00:51:17 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 20 00:51:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 00:51:18 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 20 00:51:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 20 00:51:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 20 00:51:21 2013] Fit fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 20 00:52:12 2013] Spatial fit model total counts = 4071.900000, observed total counts = 4071.000000
[Thu Jun 20 00:52:12 2013] Offset between fit and detection position for source 1 = 0.143508 pixels
[Thu Jun 20 00:52:12 2013] 4044.773000 total counts/ 3124.770000 bgd. counts: snr = 16.458120
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.143508 pixels
  Position = (297.5, 151.3) = 11 51 3.90 -29 0 43.1
  Extent = 6.1 (5.7-6.5)", rotation angle = 0
  Source counts = 920.0 +/- 63.6
  Background counts = 3124.8
  Rate = 0.01 +/- 0.0007
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 6.13"
[Thu Jun 20 00:52:59 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.823
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.13"
[Thu Jun 20 00:53:00 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 20 00:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 00:53:00 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 20 00:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 20 00:53:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 20 00:53:03 2013] Fit fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 20 00:53:36 2013] Spatial fit model total counts = 2602.630000, observed total counts = 2608.000000
[Thu Jun 20 00:53:36 2013] Offset between fit and detection position for source 1 = 0.015492 pixels
[Thu Jun 20 00:53:36 2013] 2604.916000 total counts/ 1697.270000 bgd. counts: snr = 22.031346
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015492 pixels
  Position = (297.5, 151.2) = 11 51 3.91 -29 0 43.2
  Extent = 6.1 (5.6-6.5)", rotation angle = 0
  Source counts = 907.6 +/- 51.0
  Background counts = 1697.3
  Rate = 0.01 +/- 0.0005
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:22 2013] XMMSAS src. selection expression = ellipse(25835.192400, 13109.621400, 365.096411, 365.096411, 0.000000, X, Y)
[Thu Jun 20 00:54:22 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 20 00:54:22 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (277, 130) - (318, 172)
[Thu Jun 20 00:54:22 2013] XMMSAS bgd. selection expression = annulus(25835.192400, 13109.621400, 608.494018, 1216.988035, X, Y) && !ellipse(26610.582794, 12293.586884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.856934, 11859.909088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24972.716461, 12490.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.076050, 11980.921341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.874573, 11304.905746, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:54:22 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 20 00:54:26 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 20 00:54:27 2013] Mean detx,y = (-6169.72, 13208.82) 
[Thu Jun 20 00:54:27 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 20 00:54:27 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 20 00:54:27 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 20 00:54:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 20 00:54:27 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Thu Jun 20 02:46:41 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:46:41 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1281.00
[Thu Jun 20 02:46:41 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1268.00
[Thu Jun 20 02:46:41 2013] Got source and background scale factors 417600.000000, 1579200.000000
[Thu Jun 20 02:46:41 2013] User source parameters:
  Position = (297.5, 151.2) = 11 51 3.91 -29 0 43.2
  Extent = 6.1 (5.6-6.5)", rotation angle = 0
  Source aperture counts = 945.7 +/- 36.8
  Background aperture counts = 335.3
  Rate = 0.01 +/- 0.0004

[Thu Jun 20 02:47:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:09 2013] Using photon index=1.80, rate=0.00963, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 20 02:47:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:10 2013] Updating source flux to 9.2e-14
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete