[Thu Jun 20 00:50:25 2013] Detection parameters:
  Position = (474.5, 314.8) = 11 50 5.33 -28 48 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.4 +/- 13.3
  Background counts = 43.4
  Rate = 0.0006 +/- 0.0001

[Thu Jun 20 00:50:28 2013] Off-axis axis estimate = 12.82'
[Thu Jun 20 00:51:32 2013] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:32 2013] Initial guess for spatial extent in simple fitting = 12.84"
[Thu Jun 20 00:51:32 2013] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.986
[Thu Jun 20 00:51:32 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 12.84"
[Thu Jun 20 00:51:36 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41.ximg exists
[Thu Jun 20 00:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41.csv
[Thu Jun 20 00:51:36 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Jun 20 00:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41.csv
[Thu Jun 20 00:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:41 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Jun 20 00:51:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu Jun 20 00:51:41 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Jun 20 00:51:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu Jun 20 00:51:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:36 2013] Spatial fit model total counts = 619.377000, observed total counts = 525.000000
[Thu Jun 20 00:52:36 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:52:36 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:36 2013] Assessing source extent using major
[Thu Jun 20 00:52:36 2013] Source does appear to be extended
[Thu Jun 20 00:52:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:53:10 2013] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:53:10 2013] Initial guess for spatial extent in simple fitting = 12.84"
[Thu Jun 20 00:53:10 2013] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.986
[Thu Jun 20 00:53:10 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 12.84"
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38.csv
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38.csv
[Thu Jun 20 00:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:13 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu Jun 20 00:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jun 20 00:53:13 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Jun 20 00:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jun 20 00:53:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:58 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 21.068465 pixels away
[Thu Jun 20 00:53:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:58 2013] Assessing source extent using major
[Thu Jun 20 00:53:58 2013] Source does appear to be extended
[Thu Jun 20 00:53:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 02:43:53 2013] XMMSAS src. selection expression = ellipse(41231.603455, 27340.885773, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 02:43:53 2013] Not overwriting source region fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src.reg
[Thu Jun 20 02:43:53 2013] Extracting stamp from image fullrun_mos2_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (437, 277) - (512, 352)
[Thu Jun 20 02:43:53 2013] XMMSAS bgd. selection expression = annulus(41231.603455, 27340.885773, 1087.500000, 2175.000000, X, Y)
[Thu Jun 20 02:43:53 2013] Writing fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27.gif
[Thu Jun 20 02:43:55 2013] ../../xmm0602010301/products/events/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0602010301/products/events/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Thu Jun 20 02:43:55 2013] Mean detx,y = (-13500.40, -6133.04) 
[Thu Jun 20 02:43:55 2013] ../../xmm0602010301/products/images/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0602010301/products/images/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Thu Jun 20 02:43:55 2013] ../../xmm0602010301/products/spectra/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Thu Jun 20 02:43:55 2013] Setting source spectrum file to fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 20 02:43:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 20 02:43:55 2013] ../../xmm0602010301/products/lightcurves/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Thu Jun 20 02:44:06 2013] Not generating rmf since there are only 67 counts
[Thu Jun 20 02:44:06 2013] rmf not generated due to insufficient counts
[Thu Jun 20 02:44:06 2013] fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Thu Jun 20 02:47:35 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:36 2013] Total counts from fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 348.00
[Thu Jun 20 02:47:36 2013] Total counts from fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1911.00
[Thu Jun 20 02:47:36 2013] Got source and background scale factors 1141196.000000, 8176067.000000
[Thu Jun 20 02:47:36 2013] User source parameters:
  Position = (474.5, 314.8) = 11 50 5.33 -28 48 51.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 81.3 +/- 19.7
  Background aperture counts = 266.7
  Rate = 0.0008 +/- 0.0002

[Thu Jun 20 02:47:36 2013] Updating counts from extracted products
[Thu Jun 20 02:47:36 2013] Set source signif. to 81.27/16.33 = 4.98
[Thu Jun 20 02:47:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:38 2013] Using photon index=1.80, rate=0.000778, arf fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27.arf
[Thu Jun 20 02:47:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:38 2013] Updating source flux to 1.9e-14
[Thu Jun 20 02:48:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:17 2013] xmm0602010301/analysis//spectral/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete