[Thu Jun 20 00:50:22 2013] Detection parameters:
  Position = (223.9, 374.5) = 11 51 28.26 -28 44 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.1 +/- 14.5
  Background counts = 44.1
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 00:50:28 2013] Off-axis axis estimate = 7.72'
[Thu Jun 20 00:51:32 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:32 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Thu Jun 20 00:51:32 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Thu Jun 20 00:51:32 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.29"
[Thu Jun 20 00:51:35 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 20 00:51:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 00:51:35 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 20 00:51:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 00:51:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:38 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 20 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 00:51:38 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 20 00:51:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 00:51:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:36 2013] Warning, spatial fit 21 centroid is now closest to src. 9
[Thu Jun 20 00:52:36 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:36 2013] Assessing source extent using major
[Thu Jun 20 00:52:36 2013] Source does appear to be extended
[Thu Jun 20 00:52:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:53:10 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:53:10 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Thu Jun 20 00:53:10 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Thu Jun 20 00:53:10 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 10.29"
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 00:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 20 00:53:12 2013] fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 20 00:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 20 00:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:58 2013] Spatial fit model total counts = 781.743000, observed total counts = 520.000000
[Thu Jun 20 00:53:58 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:53:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:58 2013] Assessing source extent using major
[Thu Jun 20 00:53:58 2013] Source does appear to be extended
[Thu Jun 20 00:53:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 02:43:52 2013] XMMSAS src. selection expression = ellipse(19428.214798, 32532.753082, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 02:43:52 2013] Not overwriting source region fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 20 02:43:52 2013] Extracting stamp from image fullrun_mos2_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (186, 337) - (261, 412)
[Thu Jun 20 02:43:52 2013] XMMSAS bgd. selection expression = annulus(19428.214798, 32532.753082, 1087.500000, 2175.000000, X, Y) && !ellipse(19206.919434, 33357.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18026.382600, 32508.109800, 308.794409, 308.794409, 0.000000, X, Y) && !ellipse(17255.360600, 33444.382400, 224.196806, 224.196806, 0.000000, X, Y) && !ellipse(16768.649384, 29630.529938, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 02:43:52 2013] Writing fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10.gif
[Thu Jun 20 02:43:54 2013] ../../xmm0602010301/products/events/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0602010301/products/events/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Jun 20 02:43:54 2013] Mean detx,y = (4639.91, 6988.48) 
[Thu Jun 20 02:43:54 2013] ../../xmm0602010301/products/images/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src.img and ../../xmm0602010301/products/images/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Jun 20 02:43:54 2013] ../../xmm0602010301/products/spectra/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Jun 20 02:43:54 2013] Setting source spectrum file to fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 20 02:43:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 20 02:43:54 2013] ../../xmm0602010301/products/lightcurves/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Jun 20 02:44:06 2013] Not generating rmf since there are only 97 counts
[Thu Jun 20 02:44:06 2013] rmf not generated due to insufficient counts
[Thu Jun 20 02:44:06 2013] fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Thu Jun 20 02:47:32 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:32 2013] Total counts from fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 360.00
[Thu Jun 20 02:47:32 2013] Total counts from fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 2387.00
[Thu Jun 20 02:47:32 2013] Got source and background scale factors 1089294.000000, 9014212.000000
[Thu Jun 20 02:47:32 2013] User source parameters:
  Position = (223.9, 374.5) = 11 51 28.26 -28 44 29.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 71.6 +/- 20.0
  Background aperture counts = 288.4
  Rate = 0.0007 +/- 0.0002

[Thu Jun 20 02:47:32 2013] Updating counts from extracted products
[Thu Jun 20 02:47:32 2013] Set source signif. to 71.55/16.98 = 4.21
[Thu Jun 20 02:47:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:37 2013] Using photon index=1.80, rate=0.000685, arf fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10.arf
[Thu Jun 20 02:47:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:37 2013] Updating source flux to 1.3e-14
[Thu Jun 20 02:48:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:17 2013] xmm0602010301/analysis//spectral/fullrun_mos2_xmm0602010301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete