[Thu Jun 20 00:50:15 2013] Detection parameters:
  Position = (199.3, 384.9) = 11 51 36.40 -28 43 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.0 +/- 16.0
  Background counts = 50.9
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 00:50:20 2013] Off-axis axis estimate = 9.54'
[Thu Jun 20 00:51:25 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:25 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Thu Jun 20 00:51:25 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Thu Jun 20 00:51:25 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.20"
[Thu Jun 20 00:51:28 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 00:51:28 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 20 00:51:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 00:51:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:30 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 20 00:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 00:51:30 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 20 00:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 00:51:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:25 2013] Source 9 is offset by -2.736241 and 0.049446 pixels which is larger than
2 X fitted extent = 1.228584 x 1.228584, not incorporating fit results
[Thu Jun 20 00:52:25 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.815307 pixels away
[Thu Jun 20 00:52:25 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:25 2013] Assessing source extent using major
[Thu Jun 20 00:52:25 2013] Source does appear to be extended
[Thu Jun 20 00:52:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:53:05 2013] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:53:05 2013] Initial guess for spatial extent in simple fitting = 11.20"
[Thu Jun 20 00:53:05 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.952
[Thu Jun 20 00:53:05 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.20"
[Thu Jun 20 00:53:07 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jun 20 00:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27.csv
[Thu Jun 20 00:53:07 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jun 20 00:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27.csv
[Thu Jun 20 00:53:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:09 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jun 20 00:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Jun 20 00:53:09 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jun 20 00:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Jun 20 00:53:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:49 2013] Spatial fit model total counts = 635.176000, observed total counts = 577.000000
[Thu Jun 20 00:53:49 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:53:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:49 2013] Assessing source extent using major
[Thu Jun 20 00:53:49 2013] Source does appear to be extended
[Thu Jun 20 00:53:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:55:58 2013] XMMSAS src. selection expression = ellipse(17287.385025, 33435.895813, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:55:58 2013] Not overwriting source region fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 20 00:55:58 2013] Extracting stamp from image fullrun_mos1_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (162, 347) - (237, 422)
[Thu Jun 20 00:55:58 2013] XMMSAS bgd. selection expression = annulus(17287.385025, 33435.895813, 1087.500000, 2175.000000, X, Y) && !ellipse(19242.471200, 33370.713400, 448.367213, 448.367213, 0.000000, X, Y) && !ellipse(18078.514725, 32481.829620, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:55:58 2013] Writing fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9.gif
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/events/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0602010301/products/events/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Jun 20 00:56:00 2013] Mean detx,y = (8882.04, -6355.78) 
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/images/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src.img and ../../xmm0602010301/products/images/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/spectra/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Jun 20 00:56:00 2013] Setting source spectrum file to fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 20 00:56:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/lightcurves/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Jun 20 02:00:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 02:00:25 2013] rmf not generated due to insufficient counts
[Thu Jun 20 02:47:21 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:21 2013] Total counts from fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 441.00
[Thu Jun 20 02:47:21 2013] Total counts from fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 2139.00
[Thu Jun 20 02:47:21 2013] Got source and background scale factors 1230120.000000, 8426048.000000
[Thu Jun 20 02:47:21 2013] User source parameters:
  Position = (199.3, 384.9) = 11 51 36.40 -28 43 44.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 128.7 +/- 22.0
  Background aperture counts = 312.3
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 02:47:21 2013] Updating counts from extracted products
[Thu Jun 20 02:47:21 2013] Set source signif. to 128.73/17.67 = 7.28
[Thu Jun 20 02:47:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:26 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9.arf
[Thu Jun 20 02:47:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:26 2013] Updating source flux to 2.5e-14
[Thu Jun 20 02:47:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:01 2013] xmm0602010301/analysis//spectral/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete