[Thu Jun 20 00:50:18 2013] Detection parameters:
  Position = (291.1, 332.7) = 11 51 6.02 -28 47 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.4 +/- 16.0
  Background counts = 62.2
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 00:50:20 2013] Off-axis axis estimate = 2.54'
[Thu Jun 20 00:51:25 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:25 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jun 20 00:51:25 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.922
[Thu Jun 20 00:51:25 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 7.70"
[Thu Jun 20 00:51:29 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37.ximg exists
[Thu Jun 20 00:51:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37.csv
[Thu Jun 20 00:51:29 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Jun 20 00:51:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37.csv
[Thu Jun 20 00:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:32 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Jun 20 00:51:32 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Jun 20 00:51:32 2013] Fit fullrun_mos1_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu Jun 20 00:52:24 2013] Spatial fit model total counts = 7385.720000, observed total counts = 7667.000000
[Thu Jun 20 00:52:24 2013] Offset between fit and detection position for source 35 = 5.689361 pixels
[Thu Jun 20 00:52:24 2013] Warning, changing simple spatial fit ID from 37 to 2
[Thu Jun 20 00:52:24 2013] 7008.120000 total counts/ 5901.630000 bgd. counts: snr = 14.403283
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 5.689361 pixels
  Position = (296.8, 332.8) = 11 51 4.14 -28 47 33.6
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 1106.5 +/- 83.7
  Background counts = 5901.6
  Rate = 0.01 +/- 0.0008
[Thu Jun 20 00:52:25 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:25 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 00:52:25 2013] Source does appear to be extended
[Thu Jun 20 00:52:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:25 2013] Source is confused with source 2
[Thu Jun 20 00:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:53:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 00:53:05 2013] Initial guess for spatial extent in simple fitting = 14.83"
[Thu Jun 20 00:53:05 2013] source mask rpix=3.4, npix_max = 61, mask sum = 62, frac = 1.014
[Thu Jun 20 00:53:05 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 14.83"
[Thu Jun 20 00:53:07 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34.ximg exists
[Thu Jun 20 00:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34.csv
[Thu Jun 20 00:53:07 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu Jun 20 00:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34.csv
[Thu Jun 20 00:53:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:10 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu Jun 20 00:53:10 2013] fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu Jun 20 00:53:10 2013] Fit fullrun_mos1_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Thu Jun 20 00:53:49 2013] Source 35 is offset by -2.890966 and -0.095724 pixels which is larger than
2 X fitted extent = 2.027655 x 2.027655, not incorporating fit results
[Thu Jun 20 00:53:49 2013] Warning, spatial fit 34 centroid is now closest to src. 36
[Thu Jun 20 00:53:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:49 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 00:53:49 2013] Source does appear to be extended
[Thu Jun 20 00:53:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:55:58 2013] Counts = 1106.490000, rescaling region sizes by 2.000000
[Thu Jun 20 00:55:58 2013] XMMSAS src. selection expression = ellipse(25774.552000, 28901.584000, 1779.936051, 1779.936051, 0.000000, X, Y)
[Thu Jun 20 00:55:58 2013] Not overwriting source region fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src.reg
[Thu Jun 20 00:55:58 2013] Extracting stamp from image fullrun_mos1_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (195, 230) - (399, 435)
[Thu Jun 20 00:55:58 2013] XMMSAS bgd. selection expression = annulus(25774.552000, 28901.584000, 5933.120171, 11866.240341, X, Y) && !ellipse(26394.207460, 27897.362320, 781.638422, 781.638422, 0.000000, X, Y) && !ellipse(25850.132000, 28277.664000, 946.808027, 946.808027, 0.000000, X, Y) && !ellipse(27411.985200, 33125.538800, 364.647210, 364.647210, 0.000000, X, Y) && !ellipse(17971.909988, 28719.900024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.419240, 29764.513400, 375.848811, 328.492809, 293.226000, X, Y) && !ellipse(19242.471200, 33370.713400, 448.367213, 448.367213, 0.000000, X, Y) && !ellipse(24317.815620, 28332.601800, 377.949611, 377.949611, 0.000000, X, Y) && !ellipse(30899.863000, 27420.822400, 359.305610, 359.305610, 0.000000, X, Y) && !ellipse(29934.882636, 38886.514375, 576.555710, 351.732935, 1.822628, X, Y) && !ellipse(27520.888000, 26439.826000, 1137.344033, 1137.344033, 0.000000, X, Y) && !ellipse(20072.732200, 20519.625200, 504.643215, 504.643215, 0.000000, X, Y) && !ellipse(18078.514725, 32481.829620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36501.836029, 22451.336029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36781.888519, 25271.322296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37212.282043, 24057.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27377.455600, 29885.630400, 307.568009, 307.568009, 0.000000, X, Y) && !ellipse(27108.297241, 24653.204926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26507.854401, 20837.023788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21413.843400, 26287.534600, 338.568810, 338.568810, 0.000000, X, Y) && !ellipse(25303.379120, 27840.904785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28771.099800, 29449.292200, 329.986409, 329.986409, 0.000000, X, Y) && !ellipse(25516.335700, 30896.912800, 456.189613, 456.189613, 0.000000, X, Y) && !ellipse(17287.385025, 33435.895813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.851196, 27010.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.554596, 26507.572968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.962400, 25771.706900, 470.632814, 470.632814, 0.000000, X, Y) && !ellipse(24839.044000, 26546.516000, 1110.168032, 1110.168032, 0.000000, X, Y) && !ellipse(26671.906006, 29439.665192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20577.778763, 30308.260681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34380.255219, 27481.989960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.839142, 28323.230682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38377.040741, 19198.893280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20255.088000, 42296.454660, 2190.568063, 2190.568063, 0.000000, X, Y)
[Thu Jun 20 00:55:58 2013] Writing fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35.gif
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/events/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0602010301/products/events/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Thu Jun 20 00:56:00 2013] Mean detx,y = (778.56, -266.49) 
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/images/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src.img and ../../xmm0602010301/products/images/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/spectra/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Thu Jun 20 00:56:00 2013] Setting source spectrum file to fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jun 20 00:56:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jun 20 00:56:00 2013] ../../xmm0602010301/products/lightcurves/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Thu Jun 20 02:47:23 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:23 2013] Total counts from fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 13772.00
[Thu Jun 20 02:47:23 2013] Total counts from fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 72312.00
[Thu Jun 20 02:47:23 2013] Got source and background scale factors 9537132.000000, 252948859.000000
[Thu Jun 20 02:47:23 2013] User source parameters:
  Position = (296.8, 332.8) = 11 51 4.14 -28 47 33.6
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source aperture counts = 11045.6 +/- 118.4
  Background aperture counts = 2726.4
  Rate = 0.1 +/- 0.001

[Thu Jun 20 02:47:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:26 2013] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35.arf
[Thu Jun 20 02:47:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:26 2013] Updating source flux to 9.8e-14
[Thu Jun 20 02:47:43 2013] Flag b found in src. 35 procflags, skipping spectral fitting
[Thu Jun 20 02:47:43 2013] Flag c found in src. 35 procflags, skipping spectral fitting
[Thu Jun 20 02:48:01 2013] xmm0602010301/analysis//spectral/fullrun_mos1_xmm0602010301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete