[Sat Feb 18 10:44:48 2012] Detection parameters:
  Position = (177.7, 275.2) = 1 53 42.87 -13 46 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.2 +/- 26.2
  Background counts = 121.2
  Rate = 0.003 +/- 0.0003

[Sat Feb 18 10:44:49 2012] Off-axis axis estimate = 8.92'
[Sat Feb 18 10:51:24 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:51:24 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Sat Feb 18 10:51:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Sat Feb 18 10:51:24 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 10.89"
[Sat Feb 18 15:29:20 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89.ximg exists
[Sat Feb 18 15:29:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89.csv
[Sat Feb 18 15:29:20 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89_1.ximg exists
[Sat Feb 18 15:29:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89.csv
[Sat Feb 18 15:29:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Sat Feb 18 15:29:21 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Sat Feb 18 20:45:53 2012] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 13.365922 pixels away
[Sat Feb 18 20:45:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:45:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:45:53 2012] Assessing source extent using major
[Sat Feb 18 20:45:53 2012] Source does appear to be extended
[Sat Feb 18 20:45:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 20:46:41 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 20:46:41 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Sat Feb 18 20:46:41 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Sat Feb 18 20:46:41 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 10.89"
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85.ximg exists
[Sun Feb 19 01:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85.csv
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85_1.ximg exists
[Sun Feb 19 01:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85.csv
[Sun Feb 19 01:37:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 01:37:58 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sun Feb 19 01:37:58 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sun Feb 19 01:37:58 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Sun Feb 19 05:35:32 2012] Spatial fit model total counts = 1332.000000, observed total counts = 1332.000000
[Sun Feb 19 05:35:32 2012] Offset between fit and detection position for source 90 = 0.258814 pixels
[Sun Feb 19 05:35:32 2012] 1337.229000 total counts/ 1156.950000 bgd. counts: snr = 5.300146
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.258814 pixels
  Position = (177.8, 275.4) = 1 53 42.83 -13 46 46.0
  Extent = 5.9 (4.7-7.7)", rotation angle = 0
  Source counts = 180.3 +/- 36.6
  Background counts = 1157.0
  Rate = 0.002 +/- 0.0004
[Sun Feb 19 05:35:32 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:32 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:32 2012] Source does appear to be extended
[Sun Feb 19 05:35:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 05:36:22 2012] XMMSAS src. selection expression = ellipse(15420.078640, 23914.025000, 355.612810, 355.612810, 0.000000, X, Y)
[Sun Feb 19 05:36:22 2012] Writing source region out to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90_src.reg
[Sun Feb 19 05:36:22 2012] Extracting stamp from image fullrun_pn_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (157, 255) - (198, 296)
[Sun Feb 19 05:36:22 2012] XMMSAS bgd. selection expression = annulus(15420.078640, 23914.025000, 592.688017, 1185.376034, X, Y)
[Sun Feb 19 05:36:22 2012] Writing fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90.gif
[Sun Feb 19 07:56:30 2012] Mean detx,y = (-9168.61, 8429.84) 
[Sun Feb 19 07:56:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 07:56:46 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 07:56:47 2012] Setting source spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sun Feb 19 07:56:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Mon Feb 20 06:36:02 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:02 2012] Error reading totcts from fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Mon Feb 20 06:36:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:05 2012] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src90.arf
[Mon Feb 20 06:36:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:05 2012] Updating source flux to 1.5e-14