[Sat Feb 18 10:44:48 2012] Detection parameters:
  Position = (299.2, 299.1) = 1 53 6.57 -13 45 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 454.9 +/- 34.3
  Background counts = 176.2
  Rate = 0.006 +/- 0.0005

[Sat Feb 18 10:44:49 2012] Off-axis axis estimate = 0.08'
[Sat Feb 18 10:51:24 2012] Using EEF radius (= 6.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:51:24 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Sat Feb 18 10:51:24 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Sat Feb 18 10:51:24 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 6.47"
[Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74.ximg exists
[Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74.csv
[Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74.csv
[Sat Feb 18 15:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat Feb 18 15:29:21 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Sat Feb 18 20:45:53 2012] Source 75 is offset by 6.145642 and -1.403820 pixels which is larger than
2 X fitted extent = 2.774225 x 2.774225, not incorporating fit results
[Sat Feb 18 20:45:53 2012] Spatial fit model total counts = 3678.910000, observed total counts = 3671.000000
[Sat Feb 18 20:45:53 2012] Offset between fit and detection position for source 75 = 0.233775 pixels
[Sat Feb 18 20:45:53 2012] 3562.889000 total counts/ 3381.060000 bgd. counts: snr = 3.127064
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.233775 pixels
  Position = (299.5, 299.1) = 1 53 6.50 -13 45 3.3
  Extent = 7.3 (4.9-10.1)", rotation angle = 0
  Source counts = 181.8 +/- 59.7
  Background counts = 3381.1
  Rate = 0.002 +/- 0.0007
[Sat Feb 18 20:45:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:45:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:45:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 20:45:53 2012] Source does appear to be extended
[Sat Feb 18 20:45:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 20:45:53 2012] Source is confused with source 68
[Sat Feb 18 20:46:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 20:46:41 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Feb 18 20:46:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Sat Feb 18 20:46:41 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.31"
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71.ximg exists
[Sun Feb 19 01:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71.csv
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71_1.ximg exists
[Sun Feb 19 01:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71.csv
[Sun Feb 19 01:37:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 01:37:57 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Sun Feb 19 01:37:57 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Sun Feb 19 01:37:57 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Sun Feb 19 05:35:32 2012] Warning, spatial fit 71 centroid is now closest to src. 68
[Sun Feb 19 05:35:32 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:32 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:32 2012] Source does appear to be extended
[Sun Feb 19 05:35:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 05:36:21 2012] XMMSAS src. selection expression = ellipse(26005.618200, 25971.164600, 438.879013, 438.879013, 0.000000, X, Y)
[Sun Feb 19 05:36:21 2012] Writing source region out to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75_src.reg
[Sun Feb 19 05:36:21 2012] Extracting stamp from image fullrun_pn_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (274, 274) - (325, 324)
[Sun Feb 19 05:36:21 2012] XMMSAS bgd. selection expression = annulus(26005.618200, 25971.164600, 731.465021, 1462.930042, X, Y) && !ellipse(27824.936600, 26880.818400, 3220.344093, 3220.344093, 0.000000, X, Y) && !ellipse(27370.584000, 29335.488000, 1922.688055, 1922.688055, 0.000000, X, Y) && !ellipse(27763.940000, 28376.559600, 961.344028, 961.344028, 0.000000, X, Y) && !ellipse(26335.938000, 28136.132000, 753.226422, 753.226422, 0.000000, X, Y) && !ellipse(28375.724000, 28018.646000, 1285.712037, 1285.712037, 0.000000, X, Y) && !ellipse(26027.010010, 27699.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.554000, 27911.764800, 1171.680034, 1171.680034, 0.000000, X, Y) && !ellipse(25173.442000, 27751.522000, 2295.488066, 596.563217, 301.721000, X, Y) && !ellipse(25832.758000, 27130.630000, 720.555221, 720.555221, 0.000000, X, Y) && !ellipse(26004.187378, 26568.726257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25431.472000, 26124.240000, 396.328011, 396.328011, 0.000000, X, Y) && !ellipse(26038.097800, 25251.527400, 438.264013, 438.264013, 0.000000, X, Y) && !ellipse(26750.465668, 24846.063599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.132000, 24835.132000, 873.264025, 873.264025, 0.000000, X, Y) && !ellipse(26699.278126, 24287.494822, 979.295360, 881.272073, 356.518929, X, Y) && !ellipse(24263.077800, 24437.002000, 455.817613, 455.817613, 0.000000, X, Y) && !ellipse(27421.094000, 24328.384000, 434.983213, 434.983213, 0.000000, X, Y)
[Sun Feb 19 05:36:21 2012] Writing fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75.gif
[Sun Feb 19 07:42:47 2012] Mean detx,y = (-992.00, 1364.31) 
[Sun Feb 19 07:42:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 07:43:07 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 07:43:08 2012] Setting source spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sun Feb 19 07:43:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Mon Feb 20 06:36:02 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:02 2012] Error reading totcts from fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon Feb 20 06:36:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:05 2012] Using photon index=1.80, rate=0.00214, arf fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src75.arf
[Mon Feb 20 06:36:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:05 2012] Updating source flux to 5.9e-15
[Mon Feb 20 06:42:13 2012] Flag b found in src. 75 procflags, skipping spectral fitting
[Mon Feb 20 06:42:13 2012] Flag c found in src. 75 procflags, skipping spectral fitting