[Sat Feb 18 10:44:48 2012] Detection parameters:
  Position = (355.4, 308.6) = 1 52 49.79 -13 44 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.7 +/- 18.8
  Background counts = 184.9
  Rate = 0.002 +/- 0.0003

[Sat Feb 18 10:44:49 2012] Off-axis axis estimate = 4.20'
[Sat Feb 18 10:51:24 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:51:24 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Sat Feb 18 10:51:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.785
[Sat Feb 18 10:51:24 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.53"
[Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66.ximg exists
[Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66.csv
[Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66_1.ximg exists
[Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66.csv
[Sat Feb 18 15:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Sat Feb 18 15:29:21 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Sat Feb 18 20:45:53 2012] Source 67 is offset by -7.409401 and 6.336912 pixels which is larger than
2 X fitted extent = 4.895494 x 4.895494, not incorporating fit results
[Sat Feb 18 20:45:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:45:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:45:53 2012] Assessing source extent using major
[Sat Feb 18 20:45:53 2012] Source does appear to be extended
[Sat Feb 18 20:45:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 20:46:41 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 20:46:41 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Sat Feb 18 20:46:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.785
[Sat Feb 18 20:46:41 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.53"
[Sun Feb 19 01:37:55 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src63.ximg exists
[Sun Feb 19 01:37:55 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src63_1.ximg exists
[Sun Feb 19 01:37:55 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src63 appears to have run properly
[Sun Feb 19 01:37:57 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sun Feb 19 01:37:57 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sun Feb 19 01:37:57 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sun Feb 19 05:35:32 2012] Source 67 is offset by -7.409401 and 6.285625 pixels which is larger than
2 X fitted extent = 4.923632 x 4.923632, not incorporating fit results
[Sun Feb 19 05:35:32 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:32 2012] Assessing source extent using major
[Sun Feb 19 05:35:32 2012] Source does appear to be extended
[Sun Feb 19 05:35:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 05:35:32 2012] Source is confused with source 56
[Sun Feb 19 05:36:21 2012] XMMSAS src. selection expression = ellipse(30874.050079, 26797.993347, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 19 05:36:21 2012] Writing source region out to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67_src.reg
[Sun Feb 19 05:36:21 2012] Extracting stamp from image fullrun_pn_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (318, 271) - (393, 346)
[Sun Feb 19 05:36:21 2012] XMMSAS bgd. selection expression = annulus(30874.050079, 26797.993347, 1087.500000, 2175.000000, X, Y) && !ellipse(27824.936600, 26880.818400, 3220.344093, 3220.344093, 0.000000, X, Y) && !ellipse(30942.905609, 29271.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29156.812000, 29065.072000, 1285.712037, 1285.712037, 0.000000, X, Y) && !ellipse(27370.584000, 29335.488000, 1922.688055, 1922.688055, 0.000000, X, Y) && !ellipse(27763.940000, 28376.559600, 961.344028, 961.344028, 0.000000, X, Y) && !ellipse(30182.986000, 27255.880000, 2703.056078, 2703.056078, 0.000000, X, Y) && !ellipse(28375.724000, 28018.646000, 1285.712037, 1285.712037, 0.000000, X, Y) && !ellipse(30504.808800, 27780.677560, 1351.528039, 1351.528039, 0.000000, X, Y) && !ellipse(29085.894000, 27461.436000, 597.796817, 597.796817, 0.000000, X, Y) && !ellipse(29719.303497, 26202.666748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30128.368000, 25889.424000, 1282.080037, 1282.080037, 0.000000, X, Y) && !ellipse(29487.741000, 24602.686000, 1199.960035, 1199.960035, 0.000000, X, Y) && !ellipse(31376.843597, 24233.014679, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 05:36:21 2012] Writing fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67.gif
[Sun Feb 19 07:34:22 2012] Mean detx,y = (2659.48, -1760.87) 
[Sun Feb 19 07:34:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 07:34:50 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 07:34:51 2012] Setting source spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun Feb 19 07:34:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sun Feb 19 23:31:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 19 23:31:47 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:02 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:02 2012] Error reading totcts from fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Feb 20 06:36:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:05 2012] Using photon index=1.80, rate=0.0025, arf fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src67.arf
[Mon Feb 20 06:36:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:05 2012] Updating source flux to 7.8e-15
[Mon Feb 20 06:42:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting