[Sat Feb 18 10:44:47 2012] Detection parameters: Position = (415.6, 325.6) = 1 52 31.82 -13 43 5.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 113.7 +/- 20.3 Background counts = 136.0 Rate = 0.002 +/- 0.0004 [Sat Feb 18 10:44:49 2012] Off-axis axis estimate = 8.72' [Sat Feb 18 10:51:24 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting [Sat Feb 18 10:51:24 2012] Initial guess for spatial extent in simple fitting = 10.79" [Sat Feb 18 10:51:24 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013 [Sat Feb 18 10:51:24 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 10.79" [Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54.ximg exists [Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54.csv [Sat Feb 18 15:29:19 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54_1.ximg exists [Sat Feb 18 15:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54.csv [Sat Feb 18 15:29:19 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists [Sat Feb 18 15:29:21 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists [Sat Feb 18 15:29:21 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly [Sat Feb 18 20:45:53 2012] Spatial fit model total counts = 2472.910000, observed total counts = 2472.000000 [Sat Feb 18 20:45:53 2012] Offset between fit and detection position for source 54 = 0.660831 pixels [Sat Feb 18 20:45:53 2012] Warning, changing simple spatial fit ID from 54 to 48 [Sat Feb 18 20:45:53 2012] 2454.204300 total counts/ 2419.110000 bgd. counts: snr = 0.713524 Spatial fit parameters: Offset between fit and detection position for source 54 = 0.660831 pixels Position = (415.6, 326.3) = 1 52 31.83 -13 43 4.9 Extent = 2.8" x 2.8", rotation angle = 0 Source counts = 35.1 +/- 49.5 Background counts = 2419.1 Rate = 0.0004 +/- 0.0006 Deleting source due to low Poisson probability