[Sat Feb 18 10:44:45 2012] Detection parameters:
  Position = (230.3, 197.0) = 1 53 27.15 -13 52 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2978.3 +/- 65.0
  Background counts = 134.2
  Rate = 0.03 +/- 0.0007

[Sat Feb 18 10:44:49 2012] Off-axis axis estimate = 8.86'
[Sat Feb 18 10:51:24 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:51:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 18 10:51:24 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Feb 18 10:51:24 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.863
[Sat Feb 18 10:51:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.86"
[Sat Feb 18 15:29:18 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 18 15:29:18 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 18 15:29:18 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Feb 18 15:29:20 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 18 15:29:20 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 18 15:29:20 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 18 20:45:53 2012] Spatial fit model total counts = 4162.990000, observed total counts = 4163.000000
[Sat Feb 18 20:45:53 2012] Offset between fit and detection position for source 1 = 0.288827 pixels
[Sat Feb 18 20:45:53 2012] 4199.900000 total counts/ 1983.940000 bgd. counts: snr = 49.750523
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.288827 pixels
  Position = (230.6, 197.2) = 1 53 27.08 -13 52 26.6
  Extent = 5.7 (5.6-6.0)", rotation angle = 0
  Source counts = 2216.0 +/- 64.8
  Background counts = 1983.9
  Rate = 0.03 +/- 0.0008
[Sat Feb 18 20:45:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:45:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:45:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 20:45:53 2012] Source does appear to be extended
[Sat Feb 18 20:45:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 20:46:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 20:46:41 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Sat Feb 18 20:46:41 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.905
[Sat Feb 18 20:46:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Sun Feb 19 01:37:54 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 01:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 01:37:54 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 01:37:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 01:37:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 01:37:56 2012] fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 01:37:56 2012] Fit fullrun_pn_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 05:35:31 2012] Spatial fit model total counts = 3530.940000, observed total counts = 3532.000000
[Sun Feb 19 05:35:31 2012] Offset between fit and detection position for source 1 = 0.025355 pixels
[Sun Feb 19 05:35:31 2012] 3578.220000 total counts/ 1407.750000 bgd. counts: snr = 57.848356
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025355 pixels
  Position = (230.6, 197.2) = 1 53 27.08 -13 52 26.6
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2170.5 +/- 59.8
  Background counts = 1407.8
  Rate = 0.03 +/- 0.0007
[Sun Feb 19 05:35:32 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:32 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:32 2012] Source does appear to be extended
[Sun Feb 19 05:35:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 05:36:18 2012] Counts = 2170.470000, rescaling region sizes by 2.000000
[Sun Feb 19 05:36:18 2012] XMMSAS src. selection expression = ellipse(20010.587600, 17104.477200, 676.621219, 676.621219, 0.000000, X, Y)
[Sun Feb 19 05:36:18 2012] Writing source region out to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 19 05:36:18 2012] Extracting stamp from image fullrun_pn_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (192, 158) - (269, 236)
[Sun Feb 19 05:36:18 2012] XMMSAS bgd. selection expression = annulus(20010.587600, 17104.477200, 2255.404065, 4510.808130, X, Y) && !ellipse(17012.480637, 18752.374435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.457400, 18694.898400, 413.996812, 413.996812, 0.000000, X, Y) && !ellipse(25015.635010, 14214.183304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19530.122787, 15354.263504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23460.714120, 21652.929400, 438.188813, 438.188813, 0.000000, X, Y) && !ellipse(25033.498047, 17169.063644, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 05:36:18 2012] Writing fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1.gif
[Sun Feb 19 05:36:57 2012] Mean detx,y = (-1757.62, 12046.98) 
[Sun Feb 19 05:37:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 05:38:03 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 05:38:03 2012] Setting source spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 19 05:38:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 20 06:36:01 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:01 2012] Error reading totcts from fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 20 06:36:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:02 2012] Using photon index=1.80, rate=0.0255, arf fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 06:36:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:02 2012] Updating source flux to 1.4e-13
[Mon Feb 20 06:52:24 2012] Reading fit data from xmm0602010101/analysis//spectral/fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 20 06:52:24 2012] Spectral fit parameter nH value = 2.73161e+20
[Mon Feb 20 06:52:24 2012] Spectral fit parameter PhoIndex value = 2.12736
[Mon Feb 20 06:52:24 2012] Failed to get F(0.3-8.0) from xmm0602010101/analysis//spectral/fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 06:52:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:52:24 2012] Using Nh = 2.7e+20, photon index=2.13, rate=0.0255, arf fullrun_pn_xmm0602010101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 06:52:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:52:24 2012] Updating source flux to 1.2e-13