[Sat Feb 18 10:46:15 2012] Detection parameters:
  Position = (215.2, 270.6) = 1 53 31.65 -13 47 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.4 +/- 12.5
  Background counts = 39.9
  Rate = 0.001 +/- 0.0002

[Sat Feb 18 10:46:15 2012] Off-axis axis estimate = 6.36'
[Sat Feb 18 18:18:12 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 18:18:12 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sat Feb 18 18:18:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.852
[Sat Feb 18 18:18:12 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.61"
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61.csv
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61.csv
[Sat Feb 18 20:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Feb 18 20:45:32 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Feb 18 20:46:18 2012] Source 57 is offset by -8.737282 and 1.637199 pixels which is larger than
2 X fitted extent = 1.123053 x 1.123053, not incorporating fit results
[Sat Feb 18 20:46:18 2012] Spatial fit model total counts = 399.846000, observed total counts = 400.000000
[Sat Feb 18 20:46:18 2012] Offset between fit and detection position for source 57 = 0.974228 pixels
[Sat Feb 18 20:46:18 2012] 380.660300 total counts/ 301.755000 bgd. counts: snr = 4.542333
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.974228 pixels
  Position = (215.6, 271.5) = 1 53 31.55 -13 47 3.0
  Extent = 8.5 (6.6-10.8)", rotation angle = 0
  Source counts = 78.9 +/- 19.5
  Background counts = 301.8
  Rate = 0.0009 +/- 0.0002
[Sat Feb 18 20:46:18 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:18 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 20:46:18 2012] Source does appear to be extended
[Sat Feb 18 20:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 03:37:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:37:46 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Sun Feb 19 03:37:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.039
[Sun Feb 19 03:37:46 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 8.50"
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src57.ximg exists
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src57_1.ximg exists
[Sun Feb 19 05:35:10 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src57 appears to have run properly
[Sun Feb 19 05:35:11 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sun Feb 19 05:35:11 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sun Feb 19 05:35:11 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Sun Feb 19 05:35:56 2012] Spatial fit model total counts = 388.798000, observed total counts = 389.000000
[Sun Feb 19 05:35:56 2012] Offset between fit and detection position for source 57 = 0.343159 pixels
[Sun Feb 19 05:35:56 2012] 375.805700 total counts/ 307.855000 bgd. counts: snr = 3.872762
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.343159 pixels
  Position = (215.4, 271.3) = 1 53 31.61 -13 47 4.3
  Extent = 7.7 (6.2-9.8)", rotation angle = 0
  Source counts = 68.0 +/- 19.4
  Background counts = 307.9
  Rate = 0.0008 +/- 0.0002
[Sun Feb 19 05:35:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:56 2012] Source does appear to be extended
[Sun Feb 19 05:35:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 04:15:55 2012] XMMSAS src. selection expression = ellipse(18690.259800, 23550.260600, 459.191413, 459.191413, 0.000000, X, Y)
[Mon Feb 20 04:15:55 2012] Writing source region out to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57_src.reg
[Mon Feb 20 04:15:55 2012] Extracting stamp from image fullrun_mos2_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (189, 245) - (242, 298)
[Mon Feb 20 04:15:55 2012] XMMSAS bgd. selection expression = annulus(18690.259800, 23550.260600, 765.319022, 1530.638044, X, Y) && !ellipse(19875.384516, 24511.766400, 329.926409, 329.926409, 0.000000, X, Y) && !ellipse(19535.437140, 23175.794000, 486.352014, 486.352014, 0.000000, X, Y) && !ellipse(20220.479920, 25086.206380, 242.006407, 242.006407, 0.000000, X, Y) && !ellipse(18665.635956, 22484.513275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.527200, 23056.072000, 540.478416, 540.478416, 0.000000, X, Y) && !ellipse(18247.844528, 25697.757172, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 04:15:55 2012] Writing fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57.gif
[Mon Feb 20 04:47:05 2012] Mean detx,y = (6232.12, -7309.30) 
[Mon Feb 20 04:47:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 04:47:26 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 04:47:26 2012] Setting source spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Feb 20 04:47:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Feb 20 06:28:49 2012] Not generating rmf since there are only 67 counts
[Mon Feb 20 06:28:49 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:08 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:08 2012] Error reading totcts from fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Feb 20 06:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:09 2012] Using photon index=1.80, rate=0.000763, arf fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src57.arf
[Mon Feb 20 06:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:09 2012] Updating source flux to 1.3e-14
[Mon Feb 20 06:39:11 2012] Flag b found in src. 57 procflags, skipping spectral fitting
[Mon Feb 20 06:39:11 2012] Source 57 has fewer than 100.000000 counts, skipping spectral fitting