[Sat Feb 18 10:46:14 2012] Detection parameters:
  Position = (299.5, 299.1) = 1 53 6.48 -13 45 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.0 +/- 18.4
  Background counts = 55.3
  Rate = 0.001 +/- 0.0002

[Sat Feb 18 10:46:15 2012] Off-axis axis estimate = 0.09'
[Sat Feb 18 18:18:12 2012] Using EEF radius (= 6.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 18:18:12 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Sat Feb 18 18:18:12 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.012
[Sat Feb 18 18:18:12 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 6.47"
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47.csv
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47.csv
[Sat Feb 18 20:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Feb 18 20:45:32 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat Feb 18 20:46:18 2012] Warning, spatial fit 47 centroid is now closest to src. 40
[Sat Feb 18 20:46:18 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:18 2012] Assessing source extent using major
[Sat Feb 18 20:46:18 2012] Source does appear to be extended
[Sat Feb 18 20:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 03:37:46 2012] Using EEF radius (= 6.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:37:46 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Sun Feb 19 03:37:46 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.012
[Sun Feb 19 03:37:46 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 6.47"
[Sun Feb 19 05:35:09 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src44.ximg exists
[Sun Feb 19 05:35:09 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src44_1.ximg exists
[Sun Feb 19 05:35:09 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src44 appears to have run properly
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sun Feb 19 05:35:10 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sun Feb 19 05:35:56 2012] Source 47 is offset by 5.503033 and -1.198674 pixels which is larger than
2 X fitted extent = 5.953747 x 0.936915, not incorporating fit results
[Sun Feb 19 05:35:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:56 2012] Assessing source extent using major
[Sun Feb 19 05:35:56 2012] Source does appear to be extended
[Sun Feb 19 05:35:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 04:15:54 2012] XMMSAS src. selection expression = ellipse(26012.287872, 25969.225952, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 04:15:54 2012] Writing source region out to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47_src.reg
[Mon Feb 20 04:15:54 2012] Extracting stamp from image fullrun_mos2_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (262, 262) - (337, 337)
[Mon Feb 20 04:15:54 2012] XMMSAS bgd. selection expression = annulus(26012.287872, 25969.225952, 1087.500000, 2175.000000, X, Y) && !ellipse(27805.280680, 26869.314200, 943.848027, 943.848027, 0.000000, X, Y) && !ellipse(27045.072400, 23716.061200, 355.247210, 355.247210, 0.000000, X, Y) && !ellipse(27755.576000, 24599.836000, 1180.616034, 1180.616034, 0.000000, X, Y) && !ellipse(29019.177582, 27401.662048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.326000, 25742.008000, 2361.232068, 2361.232068, 0.000000, X, Y) && !ellipse(26034.125885, 25219.463341, 582.100805, 288.602293, 64.878414, X, Y) && !ellipse(24502.120700, 28069.515800, 181.039205, 181.039205, 0.000000, X, Y) && !ellipse(26666.956000, 26712.712000, 1104.384032, 1104.384032, 0.000000, X, Y) && !ellipse(24247.850800, 24447.946800, 346.210410, 346.210410, 0.000000, X, Y) && !ellipse(22999.089813, 27802.008606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25465.256256, 26979.878784, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 04:15:54 2012] Writing fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47.gif
[Mon Feb 20 04:41:06 2012] Mean detx,y = (1097.52, -1522.26) 
[Mon Feb 20 04:41:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 04:41:27 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 04:41:27 2012] Setting source spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon Feb 20 04:41:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Mon Feb 20 06:23:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 20 06:23:18 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:08 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:08 2012] Error reading totcts from fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon Feb 20 06:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:09 2012] Using photon index=1.80, rate=0.00147, arf fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src47.arf
[Mon Feb 20 06:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:09 2012] Updating source flux to 1.6e-14
[Mon Feb 20 06:39:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting