[Sat Feb 18 10:46:14 2012] Detection parameters:
  Position = (357.3, 301.6) = 1 52 49.24 -13 44 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 13.6
  Background counts = 54.4
  Rate = 0.0008 +/- 0.0002

[Sat Feb 18 10:46:15 2012] Off-axis axis estimate = 4.27'
[Sat Feb 18 18:18:12 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 18:18:12 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sat Feb 18 18:18:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Sat Feb 18 18:18:12 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 8.56"
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71.csv
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sat Feb 18 20:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71.csv
[Sat Feb 18 20:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sat Feb 18 20:45:32 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sat Feb 18 20:45:32 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sat Feb 18 20:46:18 2012] Spatial fit model total counts = 671.049000, observed total counts = 672.000000
[Sat Feb 18 20:46:18 2012] Offset between fit and detection position for source 43 = 0.050841 pixels
[Sat Feb 18 20:46:18 2012] 666.459600 total counts/ 629.322000 bgd. counts: snr = 1.480394
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.050841 pixels
  Position = (357.3, 301.5) = 1 52 49.24 -13 44 52.6
  Extent = 4.9 (2.1-7.3)", rotation angle = 0
  Source counts = 37.1 +/- 25.8
  Background counts = 629.3
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability