[Sat Feb 18 10:46:13 2012] Detection parameters:
  Position = (315.7, 278.7) = 1 53 1.66 -13 46 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 400.9 +/- 26.7
  Background counts = 55.2
  Rate = 0.005 +/- 0.0003

[Sat Feb 18 10:46:15 2012] Off-axis axis estimate = 1.90'
[Sat Feb 18 18:18:12 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 18:18:12 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Feb 18 18:18:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.296
[Sat Feb 18 18:18:12 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.38"
[Sat Feb 18 20:45:30 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Feb 18 20:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10.csv
[Sat Feb 18 20:45:30 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Feb 18 20:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10.csv
[Sat Feb 18 20:45:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Feb 18 20:45:31 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Feb 18 20:45:31 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Feb 18 20:46:18 2012] Spatial fit model total counts = 1529.610000, observed total counts = 1515.000000
[Sat Feb 18 20:46:18 2012] Offset between fit and detection position for source 10 = 6.065884 pixels
[Sat Feb 18 20:46:18 2012] 1385.207000 total counts/ 1069.360000 bgd. counts: snr = 9.658614
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.065884 pixels
  Position = (319.6, 283.3) = 1 53 0.49 -13 46 11.9
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 315.8 +/- 37.2
  Background counts = 1069.4
  Rate = 0.004 +/- 0.0004
[Sat Feb 18 20:46:18 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:18 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 20:46:18 2012] Source does appear to be extended
[Sat Feb 18 20:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 03:37:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 03:37:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 03:37:46 2012] Initial guess for spatial extent in simple fitting = 14.76"
[Sun Feb 19 03:37:46 2012] source mask rpix=3.4, npix_max = 60, mask sum = 55, frac = 0.907
[Sun Feb 19 03:37:46 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.76"
[Sun Feb 19 05:35:09 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Feb 19 05:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9.csv
[Sun Feb 19 05:35:09 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Feb 19 05:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9.csv
[Sun Feb 19 05:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Feb 19 05:35:10 2012] fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Feb 19 05:35:10 2012] Fit fullrun_mos2_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Feb 19 05:35:56 2012] Source 10 is offset by 4.503770 and 5.230897 pixels which is larger than
2 X fitted extent = 1.759756 x 1.759756, not incorporating fit results
[Sun Feb 19 05:35:56 2012] Warning, spatial fit 9 centroid is now closest to src. 49
[Sun Feb 19 05:35:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:56 2012] Source does appear to be extended
[Sun Feb 19 05:35:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 05:35:56 2012] Source is confused with source 49
[Mon Feb 20 04:15:53 2012] XMMSAS src. selection expression = ellipse(27755.576000, 24599.836000, 885.462025, 885.462025, 0.000000, X, Y)
[Mon Feb 20 04:15:53 2012] Writing source region out to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10_src.reg
[Mon Feb 20 04:15:53 2012] Extracting stamp from image fullrun_mos2_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (269, 232) - (370, 334)
[Mon Feb 20 04:15:54 2012] XMMSAS bgd. selection expression = annulus(27755.576000, 24599.836000, 1475.770042, 2951.540085, X, Y) && !ellipse(27805.280680, 26869.314200, 943.848027, 943.848027, 0.000000, X, Y) && !ellipse(27045.072400, 23716.061200, 355.247210, 355.247210, 0.000000, X, Y) && !ellipse(29599.890240, 22389.633000, 399.164011, 399.164011, 0.000000, X, Y) && !ellipse(29019.177582, 27401.662048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.326000, 25742.008000, 2361.232068, 2361.232068, 0.000000, X, Y) && !ellipse(26034.125885, 25219.463341, 582.100805, 288.602293, 64.878414, X, Y) && !ellipse(31038.225245, 23642.294708, 376.079407, 241.511046, 23.894419, X, Y) && !ellipse(26666.956000, 26712.712000, 1104.384032, 1104.384032, 0.000000, X, Y) && !ellipse(26012.287872, 25969.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25465.256256, 26979.878784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.980286, 25906.450439, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 04:15:54 2012] Writing fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10.gif
[Mon Feb 20 04:24:50 2012] Mean detx,y = (-1033.90, -1937.81) 
[Mon Feb 20 04:24:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 04:25:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 04:25:01 2012] Setting source spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Feb 20 04:25:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Feb 20 06:36:07 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:07 2012] Error reading totcts from fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Feb 20 06:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:08 2012] Using photon index=1.80, rate=0.00354, arf fullrun_mos2_xmm0602010101_pi300-10000_pass1_cl_src10.arf
[Mon Feb 20 06:36:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:08 2012] Updating source flux to 3.2e-14
[Mon Feb 20 06:39:11 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon Feb 20 06:39:11 2012] Flag c found in src. 10 procflags, skipping spectral fitting