[Sat Feb 18 10:45:30 2012] Detection parameters:
  Position = (378.3, 136.9) = 1 52 42.94 -13 56 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 22.2
  Background counts = 37.1
  Rate = 0.0007 +/- 0.0002

[Sat Feb 18 10:45:30 2012] Off-axis axis estimate = 13.06'
[Sat Feb 18 15:29:22 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:29:22 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Sat Feb 18 15:29:22 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.971
[Sat Feb 18 15:29:22 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 12.96"
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69.csv
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69.csv
[Sat Feb 18 18:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sat Feb 18 18:18:12 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sat Feb 18 20:46:05 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 11.348417 pixels away
[Sat Feb 18 20:46:06 2012] Warning, spatial fit 69 centroid is now closest to src. 71
[Sat Feb 18 20:46:06 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:06 2012] Assessing source extent using major
[Sat Feb 18 20:46:06 2012] Source does appear to be extended
[Sat Feb 18 20:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 01:37:58 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 01:37:58 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Sun Feb 19 01:37:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.971
[Sun Feb 19 01:37:58 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 12.96"
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63.csv
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63_1.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63.csv
[Sun Feb 19 03:37:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sun Feb 19 03:37:46 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sun Feb 19 05:35:44 2012] Source 67 is offset by -2.415883 and 7.744377 pixels which is larger than
2 X fitted extent = 1.504998 x 1.504998, not incorporating fit results
[Sun Feb 19 05:35:44 2012] Warning, spatial fit 63 centroid is now closest to src. 71
[Sun Feb 19 05:35:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:44 2012] Assessing source extent using major
[Sun Feb 19 05:35:44 2012] Source does appear to be extended
[Sun Feb 19 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:17:37 2012] XMMSAS src. selection expression = ellipse(32865.290192, 11862.716782, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 02:17:37 2012] Writing source region out to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67_src.reg
[Mon Feb 20 02:17:37 2012] Extracting stamp from image fullrun_mos1_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (341, 99) - (416, 174)
[Mon Feb 20 02:17:37 2012] XMMSAS bgd. selection expression = annulus(32865.290192, 11862.716782, 1087.500000, 2175.000000, X, Y) && !ellipse(33863.936740, 10815.186000, 524.464015, 359.770410, 90.000000, X, Y) && !ellipse(32747.360800, 11163.280000, 497.989614, 497.989614, 0.000000, X, Y) && !ellipse(32315.845154, 11355.230499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33932.240265, 13495.047379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32105.747375, 11833.241974, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 02:17:37 2012] Writing fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67.gif
[Mon Feb 20 02:45:10 2012] Mean detx,y = (-10200.05, 11667.12) 
[Mon Feb 20 02:45:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 02:45:30 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 02:45:30 2012] Setting source spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Feb 20 02:45:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon Feb 20 04:15:43 2012] Not generating rmf since there are only 60 counts
[Mon Feb 20 04:15:43 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:06 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:06 2012] Error reading totcts from fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Feb 20 06:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:07 2012] Using photon index=1.80, rate=0.000684, arf fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src67.arf
[Mon Feb 20 06:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:07 2012] Updating source flux to 1.7e-14
[Mon Feb 20 06:36:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting