[Sat Feb 18 10:45:30 2012] Detection parameters:
  Position = (323.1, 224.2) = 1 52 59.43 -13 50 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.4 +/- 11.9
  Background counts = 40.0
  Rate = 0.001 +/- 0.0002

[Sat Feb 18 10:45:30 2012] Off-axis axis estimate = 5.67'
[Sat Feb 18 15:29:22 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:29:22 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Sat Feb 18 15:29:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.867
[Sat Feb 18 15:29:22 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 9.27"
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59.csv
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59.csv
[Sat Feb 18 18:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Feb 18 18:18:12 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sat Feb 18 20:46:06 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 11.465523 pixels away
[Sat Feb 18 20:46:06 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:06 2012] Assessing source extent using major
[Sat Feb 18 20:46:06 2012] Source does appear to be extended
[Sat Feb 18 20:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 01:37:58 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 01:37:58 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Sun Feb 19 01:37:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.867
[Sun Feb 19 01:37:58 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 9.27"
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55.csv
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55_1.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55.csv
[Sun Feb 19 03:37:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sun Feb 19 03:37:46 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sun Feb 19 05:35:44 2012] Spatial fit model total counts = 505.072000, observed total counts = 509.000000
[Sun Feb 19 05:35:44 2012] Offset between fit and detection position for source 62 = 3.694924 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 3.694924 pixels
  Position = (323.9, 220.5) = 1 52 59.22 -13 50 44.9
  Extent = 18.5 (18.5-37.1)", rotation angle = 0
  Source counts = 376.5 +/- 19.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0002
[Sun Feb 19 05:35:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:44 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:44 2012] Source does appear to be extended
[Sun Feb 19 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:17:36 2012] XMMSAS src. selection expression = ellipse(28127.039000, 19138.352000, 1111.914032, 1111.914032, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing source region out to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62_src.reg
[Mon Feb 20 02:17:36 2012] Extracting stamp from image fullrun_mos1_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (260, 157) - (388, 284)
[Mon Feb 20 02:17:36 2012] XMMSAS bgd. selection expression = annulus(28127.039000, 19138.352000, 1853.190053, 3706.380107, X, Y) && !ellipse(29571.204200, 22376.618600, 307.849609, 307.849609, 0.000000, X, Y) && !ellipse(26973.810000, 19709.660000, 1430.488041, 645.652819, 218.728000, X, Y) && !ellipse(29565.700500, 18217.287929, 1052.867859, 605.213668, 70.390178, X, Y) && !ellipse(31809.992480, 21908.886600, 411.746412, 411.746412, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62.gif
[Mon Feb 20 02:42:03 2012] Mean detx,y = (-6009.19, 3748.48) 
[Mon Feb 20 02:42:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 02:42:46 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 02:42:46 2012] Setting source spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Feb 20 02:42:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon Feb 20 06:36:06 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:06 2012] Error reading totcts from fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Feb 20 06:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:07 2012] Using photon index=1.80, rate=0.00423, arf fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src62.arf
[Mon Feb 20 06:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:07 2012] Updating source flux to 5.4e-14