[Sat Feb 18 10:45:28 2012] Detection parameters:
  Position = (127.6, 317.9) = 1 53 57.80 -13 43 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.8 +/- 18.5
  Background counts = 28.4
  Rate = 0.002 +/- 0.0002

[Sat Feb 18 10:45:30 2012] Off-axis axis estimate = 12.46'
[Sat Feb 18 15:29:22 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:29:22 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Feb 18 15:29:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Sat Feb 18 15:29:22 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.66"
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29.csv
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29.csv
[Sat Feb 18 18:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Feb 18 18:18:12 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Feb 18 20:46:05 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.857106 pixels away
[Sat Feb 18 20:46:06 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:06 2012] Assessing source extent using major
[Sat Feb 18 20:46:06 2012] Source does appear to be extended
[Sat Feb 18 20:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 01:37:58 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 01:37:58 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sun Feb 19 01:37:58 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Sun Feb 19 01:37:58 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 12.66"
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src29.ximg exists
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Feb 19 03:37:45 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Feb 19 03:37:46 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Feb 19 05:35:44 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.857106 pixels away
[Sun Feb 19 05:35:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:44 2012] Assessing source extent using major
[Sun Feb 19 05:35:44 2012] Source does appear to be extended
[Sun Feb 19 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:17:36 2012] XMMSAS src. selection expression = ellipse(11056.255615, 27606.022308, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing source region out to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb 20 02:17:36 2012] Extracting stamp from image fullrun_mos1_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (90, 280) - (165, 355)
[Mon Feb 20 02:17:36 2012] XMMSAS bgd. selection expression = annulus(11056.255615, 27606.022308, 1087.500000, 2175.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3.gif
[Mon Feb 20 02:33:08 2012] Mean detx,y = (-7361.39, -15036.96) 
[Mon Feb 20 02:33:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 02:33:26 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 02:33:26 2012] Setting source spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 20 02:33:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb 20 03:55:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 20 03:55:08 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:06 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:06 2012] Error reading totcts from fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 20 06:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:07 2012] Using photon index=1.80, rate=0.00212, arf fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src3.arf
[Mon Feb 20 06:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:07 2012] Updating source flux to 7.3e-14
[Mon Feb 20 06:36:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting