[Sat Feb 18 10:45:29 2012] Detection parameters:
  Position = (418.1, 357.9) = 1 52 31.08 -13 40 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.8 +/- 14.5
  Background counts = 39.7
  Rate = 0.002 +/- 0.0003

[Sat Feb 18 10:45:30 2012] Off-axis axis estimate = 9.69'
[Sat Feb 18 15:29:22 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:29:22 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sat Feb 18 15:29:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sat Feb 18 15:29:22 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.27"
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45.csv
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45.csv
[Sat Feb 18 18:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Feb 18 18:18:12 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Feb 18 20:46:06 2012] Warning, spatial fit 45 centroid is now closest to src. 20
[Sat Feb 18 20:46:06 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:06 2012] Assessing source extent using major
[Sat Feb 18 20:46:06 2012] Source does appear to be extended
[Sat Feb 18 20:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 01:37:58 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 01:37:58 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Feb 19 01:37:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Sun Feb 19 01:37:58 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 11.27"
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45.csv
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45.csv
[Sun Feb 19 03:37:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Feb 19 03:37:46 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun Feb 19 05:35:44 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.447462 pixels away
[Sun Feb 19 05:35:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:44 2012] Assessing source extent using major
[Sun Feb 19 05:35:44 2012] Source does appear to be extended
[Sun Feb 19 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:17:36 2012] XMMSAS src. selection expression = ellipse(36329.986603, 31089.742004, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing source region out to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22_src.reg
[Mon Feb 20 02:17:36 2012] Extracting stamp from image fullrun_mos1_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (381, 320) - (456, 395)
[Mon Feb 20 02:17:36 2012] XMMSAS bgd. selection expression = annulus(36329.986603, 31089.742004, 1087.500000, 2175.000000, X, Y) && !ellipse(34243.415009, 28403.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36962.924400, 29054.731200, 261.559208, 261.559208, 0.000000, X, Y) && !ellipse(34743.967682, 33031.773804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35497.151703, 31819.452911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34017.545200, 31283.718800, 345.127210, 345.127210, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22.gif
[Mon Feb 20 02:38:28 2012] Mean detx,y = (8301.34, 5061.80) 
[Mon Feb 20 02:38:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 02:39:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 02:39:02 2012] Setting source spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 20 02:39:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Feb 20 04:07:00 2012] Not generating rmf since there are only 84 counts
[Mon Feb 20 04:07:00 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:06 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:06 2012] Error reading totcts from fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 20 06:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:07 2012] Using photon index=1.80, rate=0.00152, arf fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src22.arf
[Mon Feb 20 06:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:07 2012] Updating source flux to 2.3e-14
[Mon Feb 20 06:36:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting