[Sat Feb 18 10:45:28 2012] Detection parameters:
  Position = (392.0, 409.0) = 1 52 38.90 -13 37 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 14.6
  Background counts = 39.4
  Rate = 0.002 +/- 0.0003

[Sat Feb 18 10:45:30 2012] Off-axis axis estimate = 10.50'
[Sat Feb 18 15:29:22 2012] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:29:22 2012] Initial guess for spatial extent in simple fitting = 11.68"
[Sat Feb 18 15:29:22 2012] source mask rpix=2.7, npix_max = 40, mask sum = 33, frac = 0.813
[Sat Feb 18 15:29:22 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.68"
[Sat Feb 18 18:18:10 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27.csv
[Sat Feb 18 18:18:11 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Feb 18 18:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27.csv
[Sat Feb 18 18:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Feb 18 18:18:12 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Feb 18 18:18:12 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Feb 18 20:46:05 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.698553 pixels away
[Sat Feb 18 20:46:06 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 20:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 20:46:06 2012] Assessing source extent using major
[Sat Feb 18 20:46:06 2012] Source does appear to be extended
[Sat Feb 18 20:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 01:37:58 2012] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 01:37:58 2012] Initial guess for spatial extent in simple fitting = 11.68"
[Sun Feb 19 01:37:58 2012] source mask rpix=2.7, npix_max = 40, mask sum = 33, frac = 0.813
[Sun Feb 19 01:37:58 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 11.68"
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 03:37:45 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Feb 19 03:37:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 03:37:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Feb 19 03:37:46 2012] fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Feb 19 03:37:46 2012] Fit fullrun_mos1_xmm0602010101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Feb 19 05:35:44 2012] Spatial fit model total counts = 523.997000, observed total counts = 524.000000
[Sun Feb 19 05:35:44 2012] Offset between fit and detection position for source 10 = 0.434985 pixels
[Sun Feb 19 05:35:44 2012] 514.945500 total counts/ 448.441000 bgd. counts: snr = 3.140497
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.434985 pixels
  Position = (391.5, 409.0) = 1 52 39.03 -13 37 5.0
  Extent = 6.3 (4.4-8.6)", rotation angle = 0
  Source counts = 66.5 +/- 22.7
  Background counts = 448.4
  Rate = 0.0007 +/- 0.0003
[Sun Feb 19 05:35:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 05:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 05:35:44 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 05:35:44 2012] Source does appear to be extended
[Sun Feb 19 05:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 02:17:36 2012] XMMSAS src. selection expression = ellipse(34013.815064, 35535.730400, 378.886211, 378.886211, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing source region out to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10_src.reg
[Mon Feb 20 02:17:36 2012] Extracting stamp from image fullrun_mos1_xmm0602010101_pi300-10000_cl_sm2.00.img.gz, (370, 387) - (413, 431)
[Mon Feb 20 02:17:36 2012] XMMSAS bgd. selection expression = annulus(34013.815064, 35535.730400, 631.477018, 1262.954036, X, Y) && !ellipse(33096.888397, 33681.783386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36082.390000, 38768.306200, 2085.295905, 2085.295905, 0.000000, X, Y)
[Mon Feb 20 02:17:36 2012] Writing fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10.gif
[Mon Feb 20 02:32:25 2012] Mean detx,y = (10976.34, 827.25) 
[Mon Feb 20 02:32:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 02:32:34 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 02:32:35 2012] Setting source spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Feb 20 02:32:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Feb 20 03:54:57 2012] Not generating rmf since there are only 66 counts
[Mon Feb 20 03:54:57 2012] rmf not generated due to insufficient counts
[Mon Feb 20 06:36:06 2012] Updating aperture counts using extracted products
[Mon Feb 20 06:36:06 2012] Error reading totcts from fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Feb 20 06:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 06:36:07 2012] Using photon index=1.80, rate=0.000746, arf fullrun_mos1_xmm0602010101_pi300-10000_pass1_cl_src10.arf
[Mon Feb 20 06:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 06:36:07 2012] Updating source flux to 1.5e-14
[Mon Feb 20 06:36:12 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting