[Wed Aug 8 05:57:41 2012] Detection parameters: Position = (258.9, 187.1) = 13 29 45.01 -31 36 44.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 146.2 +/- 23.5 Background counts = 149.2 Rate = 0.005 +/- 0.0008 [Wed Aug 8 05:57:41 2012] Off-axis axis estimate = 8.56' [Wed Aug 8 06:02:08 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 06:02:08 2012] Initial guess for spatial extent in simple fitting = 10.71" [Wed Aug 8 06:02:08 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026 [Wed Aug 8 06:02:08 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.71" [Wed Aug 8 07:13:52 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22.ximg exists [Wed Aug 8 07:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22.csv [Wed Aug 8 07:13:52 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22_1.ximg exists [Wed Aug 8 07:13:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22.csv [Wed Aug 8 07:13:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 07:13:53 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists [Wed Aug 8 07:13:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22.csv [Wed Aug 8 07:13:53 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists [Wed Aug 8 07:13:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22.csv [Wed Aug 8 07:13:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 10:37:18 2012] Warning, spatial fit 22 centroid is now closest to src. 35 [Wed Aug 8 10:37:18 2012] Source 24 is offset by -1.457130 and 4.814690 pixels which is larger than 2 X fitted extent = 1.585251 x 1.585251, not incorporating fit results [Wed Aug 8 10:37:18 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 10:37:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 10:37:18 2012] Assessing source extent using major [Wed Aug 8 10:37:18 2012] Source does appear to be extended [Wed Aug 8 10:37:18 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 10:37:18 2012] Source is confused with source 22 [Wed Aug 8 10:37:55 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 10:37:55 2012] Initial guess for spatial extent in simple fitting = 10.71" [Wed Aug 8 10:37:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026 [Wed Aug 8 10:37:55 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.71" [Wed Aug 8 12:22:29 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_src22.ximg exists [Wed Aug 8 12:22:29 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_src22_1.ximg exists [Wed Aug 8 12:22:29 2012] Fit fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_src22 appears to have run properly [Wed Aug 8 12:22:30 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Wed Aug 8 12:22:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22.csv [Wed Aug 8 12:22:30 2012] fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Wed Aug 8 12:22:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22.csv [Wed Aug 8 12:22:30 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 16:04:21 2012] Spatial fit model total counts = 1376.820000, observed total counts = 1262.000000 [Wed Aug 8 16:04:21 2012] Offset between fit and detection position for source 24 = 5.758952 pixels [Wed Aug 8 16:04:21 2012] 1321.355300 total counts/ 1249.940000 bgd. counts: snr = 2.019978 Spatial fit parameters: Offset between fit and detection position for source 24 = 5.758952 pixels Position = (264.1, 184.8) = 13 29 43.22 -31 36 54.0 Extent = 21.6 (12.8-43.2)" x 5.8 (2.7-14.0)", rotation angle = 36 (11-75) degrees Source counts = 71.4 +/- 36.4 Background counts = 1249.9 Rate = 0.006 +/- 0.003 [Wed Aug 8 16:04:21 2012] Source 24 is offset by 3.795195 and 2.452782 pixels which is larger than 2 X fitted extent = 1.585251 x 1.585251, not incorporating fit results [Wed Aug 8 16:04:21 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 16:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 16:04:21 2012] Assessing source extent using major axis lower bound [Wed Aug 8 16:04:21 2012] Source does appear to be extended [Wed Aug 8 16:04:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91 [Wed Aug 8 16:04:57 2012] XMMSAS src. selection expression = ellipse(22929.348000, 16026.558000, 1295.178037, 346.455610, 35.963000, X, Y) [Wed Aug 8 16:04:57 2012] Writing source region out to fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24_src.reg [Wed Aug 8 16:04:57 2012] Extracting stamp from image fullrun_pn_xmm0601980301_pi300-10000_cl_sm2.00.img.gz, (190, 110) - (339, 259) [Wed Aug 8 16:04:57 2012] XMMSAS bgd. selection expression = annulus(22929.348000, 16026.558000, 2158.630062, 4317.260124, X, Y) && !ellipse(21738.622600, 16669.997600, 1091.096031, 1091.096031, 0.000000, X, Y) && !ellipse(20654.664000, 15650.360000, 1750.824050, 1750.824050, 0.000000, X, Y) && !ellipse(22120.310959, 18006.531570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20551.460000, 18000.612000, 1669.696048, 1669.696048, 0.000000, X, Y) && !ellipse(22789.002655, 17696.270157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21379.887009, 17431.963318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.384369, 16822.002197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21001.752426, 16664.504532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22713.899841, 18368.473129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23697.593506, 16822.914200, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 16:04:57 2012] Writing fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24.gif [Wed Aug 8 16:30:27 2012] Mean detx,y = (-7878.49, 9224.50) [Wed Aug 8 16:30:32 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 8 16:31:18 2012] Binned source spectrum to 10 counts/bin [Wed Aug 8 16:31:18 2012] Setting source spectrum file to fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed Aug 8 16:31:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24_bgd.pi.gz [Wed Aug 8 16:56:46 2012] Not generating rmf since there are only 71 counts [Wed Aug 8 16:56:46 2012] rmf not generated due to insufficient counts [Wed Aug 8 18:18:00 2012] Updating aperture counts using extracted products [Wed Aug 8 18:18:00 2012] Error reading totcts from fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed Aug 8 18:18:02 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 8 18:18:02 2012] Using photon index=1.80, rate=0.00625, arf fullrun_pn_xmm0601980301_pi300-10000_pass1_cl_src24.arf [Wed Aug 8 18:18:02 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 8 18:18:02 2012] Updating source flux to 5.7e-14 [Wed Aug 8 18:20:48 2012] Flag b found in src. 24 procflags, skipping spectral fitting [Wed Aug 8 18:20:48 2012] Flag c found in src. 24 procflags, skipping spectral fitting [Wed Aug 8 18:20:48 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting