[Wed Aug  8 05:58:29 2012] Detection parameters:
  Position = (252.9, 191.2) = 13 29 47.05 -31 36 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.0 +/- 29.0
  Background counts = 197.7
  Rate = 0.008 +/- 0.0008

[Wed Aug  8 05:58:29 2012] Off-axis axis estimate = 8.45'
[Wed Aug  8 07:39:27 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 07:39:27 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Wed Aug  8 07:39:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Wed Aug  8 07:39:27 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.65"
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10.csv
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10.csv
[Wed Aug  8 10:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Aug  8 10:37:05 2012] Fit fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Aug  8 10:37:37 2012] Warning, spatial fit 10 centroid is now closest to src. 33
[Wed Aug  8 10:37:37 2012] Spatial fit model total counts = 998.871000, observed total counts = 997.000000
[Wed Aug  8 10:37:37 2012] Offset between fit and detection position for source 36 = 2.386098 pixels
[Wed Aug  8 10:37:37 2012] Warning, changing simple spatial fit ID from 10 to 18
[Wed Aug  8 10:37:37 2012] 981.071400 total counts/ 953.188000 bgd. counts: snr = 0.903143
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.386098 pixels
  Position = (250.6, 190.5) = 13 29 47.83 -31 36 29.0
  Extent = 7.0 (2.6-13.5)", rotation angle = 0
  Source counts = 27.9 +/- 31.3
  Background counts = 953.2
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability