[Wed Aug  8 05:58:29 2012] Detection parameters:
  Position = (484.6, 249.9) = 13 28 28.17 -31 32 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.9 +/- 22.3
  Background counts = 94.2
  Rate = 0.004 +/- 0.0006

[Wed Aug  8 05:58:29 2012] Off-axis axis estimate = 13.95'
[Wed Aug  8 07:39:27 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 07:39:27 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Wed Aug  8 07:39:27 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.092
[Wed Aug  8 07:39:27 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.40"
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20.csv
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20.csv
[Wed Aug  8 10:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Aug  8 10:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Aug  8 10:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Aug  8 10:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:37:37 2012] Spatial fit model total counts = 361.408000, observed total counts = 378.000000
[Wed Aug  8 10:37:37 2012] Offset between fit and detection position for source 24 = 5.276681 pixels
[Wed Aug  8 10:37:37 2012] Warning, changing simple spatial fit ID from 20 to 13
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.276681 pixels
  Position = (486.2, 255.0) = 13 28 27.66 -31 31 47.5
  Extent = 26.7 (25.9-27.0)", rotation angle = 0
  Source counts = 329.7 +/- 18.2
  Background counts = 0.0
  Rate = 0.02 +/- 0.0009
 Deleting source due to low signal-to-noise ratio