[Wed Aug  8 05:58:28 2012] Detection parameters:
  Position = (218.3, 242.9) = 13 29 58.80 -31 32 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4301.8 +/- 81.6
  Background counts = 148.7
  Rate = 0.2 +/- 0.004

[Wed Aug  8 05:58:29 2012] Off-axis axis estimate = 7.07'
[Wed Aug  8 07:39:27 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 07:39:27 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Aug  8 07:39:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Wed Aug  8 07:39:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.96"
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 10:37:04 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 10:37:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 10:37:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 10:37:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 10:37:05 2012] Fit fullrun_mos2_xmm0601980301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 10:37:37 2012] Spatial fit model total counts = 2670.660000, observed total counts = 2674.000000
[Wed Aug  8 10:37:37 2012] Offset between fit and detection position for source 1 = 0.186505 pixels
[Wed Aug  8 10:37:37 2012] 2678.686000 total counts/ 758.776000 bgd. counts: snr = 69.698604
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186505 pixels
  Position = (218.5, 242.8) = 13 29 58.74 -31 32 41.6
  Extent = 6.8 (6.5-7.1)", rotation angle = 0
  Source counts = 1919.9 +/- 51.8
  Background counts = 758.8
  Rate = 0.1 +/- 0.003
[Wed Aug  8 10:37:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 10:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 10:37:37 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 10:37:37 2012] Source does appear to be extended
[Wed Aug  8 10:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 13:08:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 13:08:23 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Wed Aug  8 13:08:23 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.168
[Wed Aug  8 13:08:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.83"
[Wed Aug  8 16:04:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 16:04:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 16:04:05 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 16:04:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 16:04:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 16:04:06 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 16:04:06 2012] fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 16:04:06 2012] Fit fullrun_mos2_xmm0601980301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 16:04:39 2012] Spatial fit model total counts = 2528.960000, observed total counts = 2527.000000
[Wed Aug  8 16:04:39 2012] Offset between fit and detection position for source 1 = 0.024539 pixels
[Wed Aug  8 16:04:39 2012] 2539.936000 total counts/ 701.176000 bgd. counts: snr = 69.440290
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024539 pixels
  Position = (218.4, 242.8) = 13 29 58.75 -31 32 41.6
  Extent = 6.5 (6.2-6.7)", rotation angle = 0
  Source counts = 1838.8 +/- 50.4
  Background counts = 701.2
  Rate = 0.09 +/- 0.003
[Wed Aug  8 16:04:39 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 16:04:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 16:04:39 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 16:04:39 2012] Source does appear to be extended
[Wed Aug  8 16:04:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 17:27:00 2012] Counts = 1838.760000, rescaling region sizes by 2.000000
[Wed Aug  8 17:27:00 2012] XMMSAS src. selection expression = ellipse(18955.439400, 21072.864200, 776.064022, 776.064022, 0.000000, X, Y)
[Wed Aug  8 17:27:00 2012] Writing source region out to fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 17:27:00 2012] Extracting stamp from image fullrun_mos2_xmm0601980301_pi300-10000_cl_sm2.00.img.gz, (174, 198) - (263, 287)
[Wed Aug  8 17:27:00 2012] XMMSAS bgd. selection expression = annulus(18955.439400, 21072.864200, 2586.880074, 5173.760149, X, Y) && !ellipse(21770.982400, 18036.660000, 1625.552047, 1625.552047, 0.000000, X, Y) && !ellipse(23216.320000, 18106.726000, 1607.560046, 1607.560046, 0.000000, X, Y) && !ellipse(22329.345398, 17278.582275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21680.789444, 17175.979996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14114.383408, 16319.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22040.406000, 16565.197800, 1703.904049, 1703.904049, 0.000000, X, Y) && !ellipse(21340.471771, 17623.884766, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 17:27:00 2012] Writing fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 17:27:07 2012] Mean detx,y = (9513.42, -3221.98) 
[Wed Aug  8 17:27:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 17:28:17 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 17:28:17 2012] Setting source spectrum file to fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 17:28:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 18:18:05 2012] Updating aperture counts using extracted products
[Wed Aug  8 18:18:05 2012] Error reading totcts from fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 18:18:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 18:18:07 2012] Using photon index=1.80, rate=0.0943, arf fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 18:18:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 18:18:07 2012] Updating source flux to 1.7e-12
[Wed Aug  8 18:20:48 2012] Reading fit data from xmm0601980301/analysis//spectral/fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 18:20:48 2012] Spectral fit parameter nH value = 3.37458e+21
[Wed Aug  8 18:20:48 2012] Spectral fit parameter PhoIndex value = 3.75702
[Wed Aug  8 18:20:48 2012] Failed to get F(0.3-8.0) from xmm0601980301/analysis//spectral/fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 18:20:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 18:20:48 2012] Using Nh = 3.4e+21, photon index=3.76, rate=0.0943, arf fullrun_mos2_xmm0601980301_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 18:20:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 18:20:48 2012] Updating source flux to 1.1e-12