[Thu May 17 02:55:35 2012] Detection parameters:
  Position = (324.5, 351.0) = 13 30 37.45 -31 42 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.6 +/- 15.3
  Background counts = 47.1
  Rate = 0.004 +/- 0.0006

[Thu May 17 02:55:35 2012] Off-axis axis estimate = 4.25'
[Thu May 17 04:25:41 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu May 17 04:25:41 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu May 17 04:25:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Thu May 17 04:25:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.55"
[Thu May 17 04:38:40 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 17 04:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4.csv
[Thu May 17 04:38:40 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 17 04:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4.csv
[Thu May 17 04:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 04:38:41 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 17 04:38:41 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 17 04:38:41 2012] Fit fullrun_mos2_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu May 17 04:38:55 2012] Source 6 is offset by 6.430818 and 5.915154 pixels which is larger than
2 X fitted extent = 0.983237 x 0.983237, not incorporating fit results
[Thu May 17 04:38:55 2012] Vigneting correction estimate = 1.000000
[Thu May 17 04:38:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 04:38:55 2012] Assessing source extent using major
[Thu May 17 04:38:55 2012] Source does appear to be extended
[Thu May 17 04:38:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 05:55:10 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:55:10 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu May 17 05:55:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Thu May 17 05:55:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.55"
[Thu May 17 06:10:27 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 17 06:10:27 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 17 06:10:27 2012] Fit fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu May 17 06:10:27 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 17 06:10:27 2012] fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 17 06:10:27 2012] Fit fullrun_mos2_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu May 17 06:10:41 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.185729 pixels away
[Thu May 17 06:10:41 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:10:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:10:41 2012] Assessing source extent using major
[Thu May 17 06:10:41 2012] Source does appear to be extended
[Thu May 17 06:10:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:47:58 2012] XMMSAS src. selection expression = ellipse(28180.443207, 30486.588379, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 06:47:58 2012] Writing source region out to fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6_src.reg
[Thu May 17 06:47:58 2012] Extracting stamp from image fullrun_mos2_xmm0601980201_pi300-10000_cl_sm2.00.img.gz, (287, 313) - (362, 388)
[Thu May 17 06:47:58 2012] XMMSAS bgd. selection expression = annulus(28180.443207, 30486.588379, 1087.500000, 2175.000000, X, Y)
[Thu May 17 06:47:58 2012] Writing fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6.gif
[Thu May 17 06:49:19 2012] Mean detx,y = (-2721.69, 1628.80) 
[Thu May 17 06:49:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 06:49:40 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 06:49:40 2012] Setting source spectrum file to fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 17 06:49:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 17 06:55:48 2012] Not generating rmf since there are only 99 counts
[Thu May 17 06:55:48 2012] rmf not generated due to insufficient counts
[Thu May 17 06:57:20 2012] Updating aperture counts using extracted products
[Thu May 17 06:57:20 2012] Error reading totcts from fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 17 06:57:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 06:57:20 2012] Using photon index=1.80, rate=0.00418, arf fullrun_mos2_xmm0601980201_pi300-10000_pass1_cl_src6.arf
[Thu May 17 06:57:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 06:57:20 2012] Updating source flux to 4.7e-14
[Thu May 17 06:57:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting