[Thu May 17 02:55:11 2012] Detection parameters:
  Position = (298.3, 403.4) = 13 30 46.38 -31 39 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.3 +/- 20.2
  Background counts = 43.3
  Rate = 0.01 +/- 0.001

[Thu May 17 02:55:12 2012] Off-axis axis estimate = 7.61'
[Thu May 17 04:13:41 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Thu May 17 04:13:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 04:13:41 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Thu May 17 04:13:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.830
[Thu May 17 04:13:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.23"
[Thu May 17 04:25:41 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 04:25:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1.csv
[Thu May 17 04:25:41 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 04:25:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1.csv
[Thu May 17 04:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 04:25:41 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 04:25:41 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 04:25:41 2012] Fit fullrun_mos1_xmm0601980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 04:38:52 2012] Spatial fit model total counts = 663.084000, observed total counts = 630.000000
[Thu May 17 04:38:52 2012] Offset between fit and detection position for source 2 = 0.583288 pixels
[Thu May 17 04:38:52 2012] 676.266000 total counts/ 466.002000 bgd. counts: snr = 9.740271
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.583288 pixels
  Position = (298.0, 402.9) = 13 30 46.47 -31 39 7.5
  Extent = 6.8 (5.8-7.8)", rotation angle = 0
  Source counts = 210.3 +/- 26.0
  Background counts = 466.0
  Rate = 0.008 +/- 0.001
[Thu May 17 04:38:52 2012] Vigneting correction estimate = 1.000000
[Thu May 17 04:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 04:38:52 2012] Assessing source extent using major axis lower bound
[Thu May 17 04:38:52 2012] Source does appear to be extended
[Thu May 17 04:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 05:42:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 05:42:06 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Thu May 17 05:42:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.823
[Thu May 17 05:42:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.80"
[Thu May 17 05:55:10 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 05:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1.csv
[Thu May 17 05:55:10 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 05:55:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1.csv
[Thu May 17 05:55:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 05:55:10 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 05:55:10 2012] fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 05:55:10 2012] Fit fullrun_mos1_xmm0601980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 17 06:10:38 2012] Spatial fit model total counts = 532.808000, observed total counts = 511.000000
[Thu May 17 06:10:38 2012] Offset between fit and detection position for source 2 = 0.027510 pixels
[Thu May 17 06:10:38 2012] 545.462000 total counts/ 329.274000 bgd. counts: snr = 11.913870
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.027510 pixels
  Position = (298.0, 402.8) = 13 30 46.46 -31 39 7.6
  Extent = 6.9 (5.8-7.9)", rotation angle = 0
  Source counts = 216.2 +/- 23.4
  Background counts = 329.3
  Rate = 0.009 +/- 0.0009
[Thu May 17 06:10:38 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:10:38 2012] Assessing source extent using major axis lower bound
[Thu May 17 06:10:38 2012] Source does appear to be extended
[Thu May 17 06:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:35:40 2012] XMMSAS src. selection expression = ellipse(25881.419300, 34998.753000, 416.199612, 416.199612, 0.000000, X, Y)
[Thu May 17 06:35:40 2012] Writing source region out to fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_src.reg
[Thu May 17 06:35:40 2012] Extracting stamp from image fullrun_mos1_xmm0601980201_pi300-10000_cl_sm2.00.img.gz, (274, 379) - (322, 427)
[Thu May 17 06:35:40 2012] XMMSAS bgd. selection expression = annulus(25881.419300, 34998.753000, 693.666020, 1387.332040, X, Y)
[Thu May 17 06:35:40 2012] Writing fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2.gif
[Thu May 17 06:35:45 2012] Mean detx,y = (6918.96, 2339.55) 
[Thu May 17 06:35:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 06:36:02 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 06:36:03 2012] Setting source spectrum file to fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 06:36:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 17 06:57:19 2012] Updating aperture counts using extracted products
[Thu May 17 06:57:19 2012] Error reading totcts from fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 06:57:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 06:57:19 2012] Using photon index=1.80, rate=0.00854, arf fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2.arf
[Thu May 17 06:57:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 06:57:19 2012] Updating source flux to 1.6e-13
[Thu May 17 06:57:47 2012] Reading fit data from xmm0601980201/analysis//spectral/fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 17 06:57:47 2012] Spectral fit parameter nH value = 5.06188e+14
[Thu May 17 06:57:47 2012] Spectral fit parameter PhoIndex value = 1.66521
[Thu May 17 06:57:47 2012] Failed to get F(0.3-8.0) from xmm0601980201/analysis//spectral/fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 17 06:57:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 06:57:47 2012] Using Nh = 5.1e+14, photon index=1.67, rate=0.00854, arf fullrun_mos1_xmm0601980201_pi300-10000_pass1_cl_src2.arf
[Thu May 17 06:57:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 06:57:47 2012] Updating source flux to 1.7e-13