[Tue Aug 28 04:24:59 2012] Detection parameters:
  Position = (206.2, 384.9) = 13 29 47.94 -31 36 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 650.1 +/- 39.5
  Background counts = 222.3
  Rate = 0.03 +/- 0.002

[Tue Aug 28 04:25:00 2012] Off-axis axis estimate = 9.17'
[Tue Aug 28 04:28:05 2012] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 04:28:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 04:28:05 2012] Initial guess for spatial extent in simple fitting = 11.01"
[Tue Aug 28 04:28:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Tue Aug 28 04:28:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.01"
[Tue Aug 28 05:36:02 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 05:36:02 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 05:36:02 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 05:36:02 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 05:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 05:36:03 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 05:36:03 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 05:36:03 2012] Fit fullrun_pn_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 06:47:59 2012] Spatial fit model total counts = 5242.140000, observed total counts = 4881.000000
[Tue Aug 28 06:47:59 2012] Offset between fit and detection position for source 1 = 0.648079 pixels
[Tue Aug 28 06:47:59 2012] 5065.454000 total counts/ 4455.300000 bgd. counts: snr = 9.141153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.648079 pixels
  Position = (206.8, 384.9) = 13 29 47.73 -31 36 26.6
  Extent = 13.5 (10.5-16.1)", rotation angle = 0
  Source counts = 610.2 +/- 71.2
  Background counts = 4455.3
  Rate = 0.03 +/- 0.004
[Tue Aug 28 06:47:59 2012] Spatial fit model total counts = 3361.950000, observed total counts = 3340.000000
[Tue Aug 28 06:47:59 2012] Offset between fit and detection position for source 1 = 0.616823 pixels
[Tue Aug 28 06:47:59 2012] Warning, changing simple spatial fit ID from 1 to 5
[Tue Aug 28 06:47:59 2012] 3287.630000 total counts/ 2104.190000 bgd. counts: snr = 25.799053
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.616823 pixels
  Position = (206.2, 384.9) = 13 29 47.94 -31 36 26.5
  Extent = 22.0 (22.0-22.0)", rotation angle = 0
  Source counts = 1183.4 +/- 57.3
  Background counts = 2104.2
  Rate = 0.06 +/- 0.003
[Tue Aug 28 06:47:59 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 06:47:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 06:47:59 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 06:47:59 2012] Source does appear to be extended
[Tue Aug 28 06:47:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 06:47:59 2012] Source is confused with source 5
[Tue Aug 28 06:47:59 2012] Source is confused with source 6
[Tue Aug 28 06:47:59 2012] Source is confused with source 7
[Tue Aug 28 06:47:59 2012] Source is confused with source 8
[Tue Aug 28 06:47:59 2012] Source is confused with source 9
[Tue Aug 28 06:47:59 2012] Source is confused with source 10
[Tue Aug 28 06:47:59 2012] Source is confused with source 11
[Tue Aug 28 06:47:59 2012] Source is confused with source 20
[Tue Aug 28 06:47:59 2012] Source is confused with source 22
[Tue Aug 28 06:48:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:48:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 06:48:14 2012] Initial guess for spatial extent in simple fitting = 21.96"
[Tue Aug 28 06:48:14 2012] source mask rpix=5.0, npix_max = 123, mask sum = 121, frac = 0.983
[Tue Aug 28 06:48:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 21.96"
[Tue Aug 28 11:00:29 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 11:00:29 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 11:00:29 2012] Fit fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Aug 28 11:00:29 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 11:00:29 2012] fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 11:00:30 2012] Fit fullrun_pn_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 12:50:55 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Tue Aug 28 12:50:55 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 12:50:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 12:50:55 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 12:50:55 2012] Source does appear to be extended
[Tue Aug 28 12:50:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 12:51:19 2012] Counts = 1183.440000, rescaling region sizes by 2.000000
[Tue Aug 28 12:51:19 2012] XMMSAS src. selection expression = ellipse(17891.404000, 33439.106000, 2635.152076, 2635.152076, 0.000000, X, Y)
[Tue Aug 28 12:51:19 2012] Writing source region out to fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 12:51:19 2012] Extracting stamp from image fullrun_pn_xmm0601980101_pi300-10000_cl_sm2.00.img.gz, (55, 233) - (358, 536)
[Tue Aug 28 12:51:19 2012] XMMSAS bgd. selection expression = annulus(17891.404000, 33439.106000, 8783.840253, 17567.680506, X, Y) && !ellipse(15102.562744, 38010.898926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.563324, 37803.015442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15737.360336, 34928.550629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18457.562000, 33746.270000, 1686.152049, 1686.152049, 0.000000, X, Y) && !ellipse(18997.866409, 33864.969788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16610.145462, 33701.335022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17191.576965, 33709.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16959.998672, 33000.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18033.392000, 33514.816000, 2507.416072, 2507.416072, 0.000000, X, Y) && !ellipse(17194.603699, 32579.667450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10957.409538, 27477.569336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22878.078888, 24577.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28980.601600, 39759.978000, 630.713618, 630.713618, 0.000000, X, Y) && !ellipse(19300.815400, 34726.292000, 851.664025, 851.664025, 0.000000, X, Y) && !ellipse(16456.528122, 33246.047943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19102.920609, 33048.604034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16803.398407, 19354.873596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.868011, 32567.982666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31358.558029, 22273.491600, 332.373610, 332.373610, 0.000000, X, Y) && !ellipse(24115.556183, 20911.180084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20710.384201, 20660.348846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33315.179596, 41496.793091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19842.425919, 33537.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.415497, 16859.917343, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 12:51:19 2012] Writing fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 12:51:53 2012] Mean detx,y = (-5093.91, -8656.15) 
[Tue Aug 28 12:52:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 13:01:48 2012] grppha failed
[Tue Aug 28 13:01:48 2012] Setting source spectrum file to fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 13:01:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 13:56:25 2012] Updating aperture counts using extracted products
[Tue Aug 28 13:56:25 2012] Error reading totcts from fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 13:56:25 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 13:56:29 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 28 13:56:29 2012] Source 1 has no response, skipping
[Tue Aug 28 13:56:30 2012] xmm0601980101/analysis//spectral/fullrun_pn_xmm0601980101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete