[Tue Aug 28 04:25:39 2012] Detection parameters:
  Position = (222.5, 385.8) = 13 29 42.38 -31 36 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 15.7
  Background counts = 65.0
  Rate = 0.004 +/- 0.001

[Tue Aug 28 04:25:40 2012] Off-axis axis estimate = 8.39'
[Tue Aug 28 06:19:34 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 06:19:34 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Tue Aug 28 06:19:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.866
[Tue Aug 28 06:19:34 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.62"
[Tue Aug 28 06:47:52 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Aug 28 06:47:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7.csv
[Tue Aug 28 06:47:52 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Aug 28 06:47:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7.csv
[Tue Aug 28 06:47:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 06:47:52 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Aug 28 06:47:52 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Aug 28 06:47:52 2012] Fit fullrun_mos2_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Aug 28 06:48:06 2012] Spatial fit model total counts = 1039.280000, observed total counts = 1039.000000
[Tue Aug 28 06:48:06 2012] Offset between fit and detection position for source 11 = 3.455139 pixels
[Tue Aug 28 06:48:06 2012] 988.590000 total counts/ 779.437000 bgd. counts: snr = 7.491583
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.455139 pixels
  Position = (226.0, 386.0) = 13 29 41.21 -31 36 22.0
  Extent = 21.2 (21.2-42.5)", rotation angle = 0
  Source counts = 209.2 +/- 31.4
  Background counts = 779.4
  Rate = 0.008 +/- 0.001
[Tue Aug 28 06:48:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 06:48:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 06:48:06 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 06:48:06 2012] Source does appear to be extended
[Tue Aug 28 06:48:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 06:48:06 2012] Source is confused with source 10
[Tue Aug 28 12:15:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 12:15:46 2012] Initial guess for spatial extent in simple fitting = 21.25"
[Tue Aug 28 12:15:46 2012] source mask rpix=4.9, npix_max = 115, mask sum = 97, frac = 0.836
[Tue Aug 28 12:15:46 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 21.25"
[Tue Aug 28 12:50:36 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Aug 28 12:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6.csv
[Tue Aug 28 12:50:36 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Aug 28 12:50:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6.csv
[Tue Aug 28 12:50:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 12:50:38 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Aug 28 12:50:38 2012] fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Aug 28 12:50:38 2012] Fit fullrun_mos2_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Aug 28 12:51:06 2012] Warning, spatial fit 6 centroid is now closest to src. 10
[Tue Aug 28 12:51:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 12:51:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 12:51:06 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 12:51:06 2012] Source does appear to be extended
[Tue Aug 28 12:51:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 13:50:14 2012] XMMSAS src. selection expression = ellipse(19610.962000, 33530.719200, 1274.826037, 1274.826037, 0.000000, X, Y)
[Tue Aug 28 13:50:14 2012] Writing source region out to fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11_src.reg
[Tue Aug 28 13:50:14 2012] Extracting stamp from image fullrun_mos2_xmm0601980101_pi300-10000_cl_sm2.00.img.gz, (153, 313) - (299, 459)
[Tue Aug 28 13:50:14 2012] XMMSAS bgd. selection expression = annulus(19610.962000, 33530.719200, 2124.710061, 4249.420122, X, Y) && !ellipse(15095.278200, 37963.012940, 469.943214, 469.943214, 0.000000, X, Y) && !ellipse(17935.828000, 33546.201000, 1733.232050, 1733.232050, 0.000000, X, Y) && !ellipse(18680.756348, 33621.362885, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 13:50:14 2012] Writing fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11.gif
[Tue Aug 28 13:52:38 2012] Mean detx,y = (3986.94, 8023.82) 
[Tue Aug 28 13:52:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 13:53:12 2012] grppha failed
[Tue Aug 28 13:53:12 2012] Setting source spectrum file to fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Aug 28 13:53:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Aug 28 13:56:26 2012] Updating aperture counts using extracted products
[Tue Aug 28 13:56:26 2012] Error reading totcts from fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Aug 28 13:56:26 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 13:56:28 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue Aug 28 13:56:28 2012] Source 11 has no response, skipping
[Tue Aug 28 13:56:29 2012] xmm0601980101/analysis//spectral/fullrun_mos2_xmm0601980101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete