[Tue Aug 28 04:25:20 2012] Detection parameters:
  Position = (204.8, 392.9) = 13 29 48.40 -31 35 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.8 +/- 18.8
  Background counts = 66.4
  Rate = 0.005 +/- 0.0007

[Tue Aug 28 04:25:21 2012] Off-axis axis estimate = 9.64'
[Tue Aug 28 05:36:03 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 05:36:03 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Tue Aug 28 05:36:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Tue Aug 28 05:36:03 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.25"
[Tue Aug 28 06:19:33 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13.ximg exists
[Tue Aug 28 06:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 06:19:33 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Aug 28 06:19:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 06:19:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 06:19:33 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Aug 28 06:19:33 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Aug 28 06:19:33 2012] Fit fullrun_mos1_xmm0601980101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Aug 28 06:48:03 2012] Warning, spatial fit 13 centroid is now closest to src. 4
[Tue Aug 28 06:48:03 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 06:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 06:48:03 2012] Assessing source extent using major
[Tue Aug 28 06:48:03 2012] Source does appear to be extended
[Tue Aug 28 06:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 06:48:03 2012] Source is confused with source 5
[Tue Aug 28 11:00:30 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 11:00:30 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Tue Aug 28 11:00:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Tue Aug 28 11:00:30 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.25"
[Tue Aug 28 12:15:45 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12.ximg exists
[Tue Aug 28 12:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12.csv
[Tue Aug 28 12:15:45 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Aug 28 12:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12.csv
[Tue Aug 28 12:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 12:15:45 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Aug 28 12:15:45 2012] fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Aug 28 12:15:45 2012] Fit fullrun_mos1_xmm0601980101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Aug 28 12:51:02 2012] Source 9 is offset by 1.010584 and -4.210720 pixels which is larger than
2 X fitted extent = 1.268469 x 1.268469, not incorporating fit results
[Tue Aug 28 12:51:02 2012] Warning, spatial fit 12 centroid is now closest to src. 4
[Tue Aug 28 12:51:02 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 12:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 12:51:02 2012] Assessing source extent using major
[Tue Aug 28 12:51:02 2012] Source does appear to be extended
[Tue Aug 28 12:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 13:42:06 2012] XMMSAS src. selection expression = ellipse(17772.778809, 34133.061371, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 13:42:06 2012] Writing source region out to fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9_src.reg
[Tue Aug 28 13:42:06 2012] Extracting stamp from image fullrun_mos1_xmm0601980101_pi300-10000_cl_sm2.00.img.gz, (167, 355) - (242, 430)
[Tue Aug 28 13:42:06 2012] XMMSAS bgd. selection expression = annulus(17772.778809, 34133.061371, 1087.500000, 2175.000000, X, Y) && !ellipse(18652.286600, 33387.180600, 967.576028, 967.576028, 0.000000, X, Y) && !ellipse(18586.198000, 34105.294000, 1499.896043, 1499.896043, 0.000000, X, Y) && !ellipse(17476.940000, 32144.902000, 1723.128050, 1723.128050, 0.000000, X, Y) && !ellipse(18320.710480, 34930.318878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19154.166000, 34125.568600, 1711.400049, 1711.400049, 0.000000, X, Y) && !ellipse(16844.555344, 33773.713776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16734.925201, 33320.465759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20461.131378, 34155.082184, 1740.000000, 1740.000000, 0.000000, X, Y)
[Tue Aug 28 13:42:06 2012] Writing fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9.gif
[Tue Aug 28 13:47:13 2012] Mean detx,y = (9363.20, -5406.72) 
[Tue Aug 28 13:47:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 13:47:26 2012] grppha failed
[Tue Aug 28 13:47:27 2012] Setting source spectrum file to fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9_src.pi.gz
[Tue Aug 28 13:47:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Aug 28 13:50:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 13:50:11 2012] rmf not generated due to insufficient counts
[Tue Aug 28 13:56:26 2012] Updating aperture counts using extracted products
[Tue Aug 28 13:56:26 2012] Error reading totcts from fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9_src.pi.gz
[Tue Aug 28 13:56:26 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 13:56:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 13:56:28 2012] xmm0601980101/analysis//spectral/fullrun_mos1_xmm0601980101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete