[Thu Jun 21 19:22:25 2012] Detection parameters:
  Position = (99.9, 405.6) = 14 32 52.50 13 37 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 18.5
  Background counts = 71.8
  Rate = 0.003 +/- 0.0004

[Thu Jun 21 19:22:27 2012] Off-axis axis estimate = 16.36'
[Thu Jun 21 19:26:46 2012] Using EEF radius (= 14.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:26:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 19:26:46 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Thu Jun 21 19:26:46 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.941
[Thu Jun 21 19:26:46 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 14.61"
[Thu Jun 21 21:12:25 2012] fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 21 21:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22.csv
[Thu Jun 21 21:12:25 2012] fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 21 21:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22.csv
[Thu Jun 21 21:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 21:12:26 2012] fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 21 21:12:26 2012] fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 21 21:12:26 2012] Fit fullrun_pn_xmm0601970101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jun 21 23:14:43 2012] Spatial fit model total counts = 1126.670000, observed total counts = 1092.000000
[Thu Jun 21 23:14:43 2012] Offset between fit and detection position for source 22 = 0.290848 pixels
[Thu Jun 21 23:14:43 2012] 1127.631900 total counts/ 1080.960000 bgd. counts: snr = 1.419550
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.290848 pixels
  Position = (100.1, 405.8) = 14 32 52.43 13 37 38.8
  Extent = 3.7" x 3.7", rotation angle = 0
  Source counts = 46.7 +/- 33.6
  Background counts = 1081.0
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability