[Wed Dec 28 03:41:22 2011] Detection parameters:
  Position = (304.0, 275.1) = 18 49 43.05 -23 50 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.3 +/- 30.1
  Background counts = 360.1
  Rate = 0.004 +/- 0.0007

[Wed Dec 28 03:41:22 2011] Off-axis axis estimate = 1.74'
[Wed Dec 28 04:33:25 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 04:33:25 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Dec 28 04:33:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Dec 28 04:33:25 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.30"
[Wed Dec 28 05:08:37 2011] fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Dec 28 05:08:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 05:08:37 2011] fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Dec 28 05:08:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 05:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:08:37 2011] fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Dec 28 05:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Dec 28 05:08:37 2011] fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Dec 28 05:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Dec 28 05:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:34 2011] Source 3 is offset by 4.542854 and -7.476155 pixels which is larger than
2 X fitted extent = 6.670851 x 6.670851, not incorporating fit results
[Wed Dec 28 10:28:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:34 2011] Assessing source extent using major
[Wed Dec 28 10:28:34 2011] Source does appear to be extended
[Wed Dec 28 10:28:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:28:34 2011] Deleting source due to low Poisson probability 0.9