[Wed Dec 28 03:43:31 2011] Detection parameters:
  Position = (304.9, 391.9) = 18 49 42.76 -23 42 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.4 +/- 16.5
  Background counts = 54.5
  Rate = 0.003 +/- 0.0004

[Wed Dec 28 03:43:32 2011] Off-axis axis estimate = 6.79'
[Wed Dec 28 09:12:24 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:12:24 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Wed Dec 28 09:12:24 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.183
[Wed Dec 28 09:12:24 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.83"
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 10:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 28 10:28:30 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 28 10:28:53 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.378082 pixels away
[Wed Dec 28 10:28:53 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:53 2011] Assessing source extent using major
[Wed Dec 28 10:28:53 2011] Source does appear to be extended
[Wed Dec 28 10:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:59:40 2011] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:59:40 2011] Initial guess for spatial extent in simple fitting = 9.83"
[Wed Dec 28 14:59:40 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.183
[Wed Dec 28 14:59:40 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 9.83"
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 28 15:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 28 15:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 15:55:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 28 15:55:18 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 28 15:55:38 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.607201 pixels away
[Wed Dec 28 15:55:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:38 2011] Assessing source extent using major
[Wed Dec 28 15:55:38 2011] Source does appear to be extended
[Wed Dec 28 15:55:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 19:11:30 2011] XMMSAS src. selection expression = ellipse(26481.439514, 34047.813690, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing source region out to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7_src.reg
[Wed Dec 28 19:11:30 2011] Extracting stamp from image fullrun_mos2_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (267, 354) - (342, 429)
[Wed Dec 28 19:11:30 2011] XMMSAS bgd. selection expression = annulus(26481.439514, 34047.813690, 1087.500000, 2175.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7.gif
[Wed Dec 28 19:24:56 2011] Mean detx,y = (971.35, -9772.12) 
[Wed Dec 28 19:25:00 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 19:25:52 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 19:25:52 2011] Setting source spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 28 19:25:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Dec 28 19:47:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 19:47:08 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:52 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:52 2011] Error reading totcts from fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 28 19:48:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:53 2011] Using photon index=1.80, rate=0.0026, arf fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src7.arf
[Wed Dec 28 19:48:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:53 2011] Updating source flux to 3.9e-14
[Wed Dec 28 19:50:11 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting