[Wed Dec 28 03:43:31 2011] Detection parameters:
  Position = (401.2, 426.0) = 18 49 12.29 -23 39 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.7 +/- 23.8
  Background counts = 43.8
  Rate = 0.005 +/- 0.0003

[Wed Dec 28 03:43:32 2011] Off-axis axis estimate = 11.87'
[Wed Dec 28 09:12:24 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:12:24 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Dec 28 09:12:24 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Wed Dec 28 09:12:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.36"
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 10:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Dec 28 10:28:30 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Dec 28 10:28:53 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.181748 pixels away
[Wed Dec 28 10:28:53 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:53 2011] Assessing source extent using major
[Wed Dec 28 10:28:53 2011] Source does appear to be extended
[Wed Dec 28 10:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:59:40 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:59:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 14:59:40 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Dec 28 14:59:40 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Wed Dec 28 14:59:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.36"
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Dec 28 15:55:18 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Dec 28 15:55:18 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Dec 28 15:55:38 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.195068 pixels away
[Wed Dec 28 15:55:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:38 2011] Assessing source extent using major
[Wed Dec 28 15:55:38 2011] Source does appear to be extended
[Wed Dec 28 15:55:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 19:11:30 2011] XMMSAS src. selection expression = ellipse(34853.923065, 37009.456390, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing source region out to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4_src.reg
[Wed Dec 28 19:11:30 2011] Extracting stamp from image fullrun_mos2_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (364, 388) - (439, 463)
[Wed Dec 28 19:11:30 2011] XMMSAS bgd. selection expression = annulus(34853.923065, 37009.456390, 1087.500000, 2175.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4.gif
[Wed Dec 28 19:21:21 2011] Mean detx,y = (9018.39, -13522.21) 
[Wed Dec 28 19:21:24 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 19:22:06 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 19:22:07 2011] Setting source spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 19:22:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Dec 28 19:46:30 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 19:46:30 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:51 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:51 2011] Error reading totcts from fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 19:48:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:53 2011] Using photon index=1.80, rate=0.00461, arf fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src4.arf
[Wed Dec 28 19:48:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:53 2011] Updating source flux to 1.3e-13
[Wed Dec 28 19:50:11 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting