[Wed Dec 28 03:43:31 2011] Detection parameters:
  Position = (283.0, 281.8) = 18 49 49.71 -23 50 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43606.5 +/- 248.4
  Background counts = 79.3
  Rate = 0.7 +/- 0.004

[Wed Dec 28 03:43:32 2011] Off-axis axis estimate = 1.64'
[Wed Dec 28 09:12:24 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:12:24 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Dec 28 09:12:24 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Dec 28 09:12:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 10:28:30 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 10:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 10:28:30 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 10:28:30 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 10:28:53 2011] Spatial fit model total counts = 37355.000000, observed total counts = 37355.000000
[Wed Dec 28 10:28:53 2011] Offset between fit and detection position for source 2 = 0.128378 pixels
[Wed Dec 28 10:28:53 2011] 37484.040000 total counts/ 7641.740000 bgd. counts: snr = 341.378498
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.128378 pixels
  Position = (283.0, 281.7) = 18 49 49.72 -23 50 12.8
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 29842.3 +/- 193.6
  Background counts = 7641.7
  Rate = 0.4 +/- 0.003
[Wed Dec 28 10:28:53 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:53 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:28:53 2011] Source does appear to be extended
[Wed Dec 28 10:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:59:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:59:40 2011] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Dec 28 14:59:40 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.973
[Wed Dec 28 14:59:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 15:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 15:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 15:55:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 15:55:18 2011] fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 15:55:18 2011] Fit fullrun_mos2_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 15:55:38 2011] Spatial fit model total counts = 37403.800000, observed total counts = 37389.000000
[Wed Dec 28 15:55:38 2011] Offset between fit and detection position for source 2 = 0.010444 pixels
[Wed Dec 28 15:55:38 2011] 37664.220000 total counts/ 7770.220000 bgd. counts: snr = 339.130908
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010444 pixels
  Position = (283.0, 281.7) = 18 49 49.72 -23 50 12.8
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 29894.0 +/- 194.1
  Background counts = 7770.2
  Rate = 0.4 +/- 0.003
[Wed Dec 28 15:55:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:38 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 15:55:38 2011] Source does appear to be extended
[Wed Dec 28 15:55:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 19:11:30 2011] Counts = 29894.000000, rescaling region sizes by 3.000000
[Wed Dec 28 19:11:30 2011] XMMSAS src. selection expression = ellipse(24571.601020, 24456.962000, 984.655828, 984.655828, 0.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing source region out to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 28 19:11:30 2011] Extracting stamp from image fullrun_mos2_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (226, 225) - (340, 338)
[Wed Dec 28 19:11:30 2011] XMMSAS bgd. selection expression = annulus(24571.601020, 24456.962000, 4923.279142, 9846.558283, X, Y) && !ellipse(24116.907593, 16129.315674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.439514, 34047.813690, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 19:11:30 2011] Writing fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2.gif
[Wed Dec 28 19:12:01 2011] Mean detx,y = (-0.50, -52.92) 
[Wed Dec 28 19:12:07 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 19:20:27 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 19:20:28 2011] Setting source spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 19:20:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 28 19:48:51 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:51 2011] Error reading totcts from fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 19:48:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:52 2011] Using photon index=1.80, rate=0.449, arf fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 19:48:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:53 2011] Updating source flux to 4.4e-12
[Wed Dec 28 19:51:17 2011] Reading fit data from xmm0601950101/analysis//spectral/fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 28 19:51:17 2011] Spectral fit parameter nH value = 5.15679e+21
[Wed Dec 28 19:51:17 2011] Spectral fit parameter PhoIndex value = 6.4386
[Wed Dec 28 19:51:17 2011] Failed to get F(0.3-8.0) from xmm0601950101/analysis//spectral/fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 19:51:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:51:17 2011] Using Nh = 5.2e+21, photon index=6.44, rate=0.449, arf fullrun_mos2_xmm0601950101_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 19:51:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:51:17 2011] Updating source flux to 2.7e-12