[Wed Dec 28 03:42:28 2011] Detection parameters:
  Position = (332.4, 127.0) = 18 49 34.03 -24 1 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.2 +/- 17.7
  Background counts = 56.9
  Rate = 0.002 +/- 0.0003

[Wed Dec 28 03:42:30 2011] Off-axis axis estimate = 12.67'
[Wed Dec 28 05:08:37 2011] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:08:37 2011] Initial guess for spatial extent in simple fitting = 12.76"
[Wed Dec 28 05:08:37 2011] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890
[Wed Dec 28 05:08:37 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 12.76"
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17.csv
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17.csv
[Wed Dec 28 09:12:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Dec 28 09:12:24 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Dec 28 10:28:44 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.703494 pixels away
[Wed Dec 28 10:28:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:44 2011] Assessing source extent using major
[Wed Dec 28 10:28:44 2011] Source does appear to be extended
[Wed Dec 28 10:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 11:13:18 2011] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:13:18 2011] Initial guess for spatial extent in simple fitting = 12.76"
[Wed Dec 28 11:13:18 2011] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890
[Wed Dec 28 11:13:18 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 12.76"
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Dec 28 14:59:40 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Dec 28 15:55:32 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.000784 pixels away
[Wed Dec 28 15:55:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:32 2011] Assessing source extent using major
[Wed Dec 28 15:55:32 2011] Source does appear to be extended
[Wed Dec 28 15:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:39:18 2011] XMMSAS src. selection expression = ellipse(28873.012909, 11003.830070, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing source region out to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6_src.reg
[Wed Dec 28 17:39:18 2011] Extracting stamp from image fullrun_mos1_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (295, 90) - (370, 165)
[Wed Dec 28 17:39:18 2011] XMMSAS bgd. selection expression = annulus(28873.012909, 11003.830070, 1087.500000, 2175.000000, X, Y) && !ellipse(26188.284454, 11830.740936, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6.gif
[Wed Dec 28 18:03:09 2011] Mean detx,y = (13169.65, -5632.12) 
[Wed Dec 28 18:03:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 18:03:57 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 18:03:57 2011] Setting source spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 28 18:03:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Dec 28 19:10:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 19:10:50 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:49 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:49 2011] Error reading totcts from fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 28 19:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:51 2011] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src6.arf
[Wed Dec 28 19:48:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:51 2011] Updating source flux to 4.2e-14
[Wed Dec 28 19:48:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting