[Wed Dec 28 03:42:28 2011] Detection parameters:
  Position = (283.0, 281.7) = 18 49 49.73 -23 50 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43955.9 +/- 249.3
  Background counts = 96.0
  Rate = 0.7 +/- 0.004

[Wed Dec 28 03:42:30 2011] Off-axis axis estimate = 1.65'
[Wed Dec 28 05:08:37 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:08:37 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Dec 28 05:08:37 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Wed Dec 28 05:08:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Dec 28 09:12:23 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 09:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 09:12:23 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 09:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 09:12:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Dec 28 09:12:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:44 2011] Warning, spatial fit 1 centroid is now closest to src. 8
[Wed Dec 28 10:28:44 2011] Spatial fit model total counts = 31481.000000, observed total counts = 31308.000000
[Wed Dec 28 10:28:44 2011] Offset between fit and detection position for source 5 = 0.079784 pixels
[Wed Dec 28 10:28:44 2011] Warning, changing simple spatial fit ID from 1 to 6
[Wed Dec 28 10:28:44 2011] 32119.480000 total counts/ 6567.380000 bgd. counts: snr = 315.304759
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.079784 pixels
  Position = (282.9, 281.7) = 18 49 49.75 -23 50 12.9
  Extent = 4.9 (4.9-5.0)" x 4.6 (4.6-4.7)", rotation angle = 324 (315-334) degrees
  Source counts = 25552.1 +/- 179.2
  Background counts = 6567.4
  Rate = 0.4 +/- 0.003
[Wed Dec 28 10:28:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:28:44 2011] Source does appear to be extended
[Wed Dec 28 10:28:44 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Wed Dec 28 10:28:44 2011] Source is confused with source 10
[Wed Dec 28 11:13:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:13:18 2011] Initial guess for spatial extent in simple fitting = 4.79"
[Wed Dec 28 11:13:18 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.878
[Wed Dec 28 11:13:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.79"
[Wed Dec 28 14:59:39 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 14:59:40 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 15:55:32 2011] Spatial fit model total counts = 37087.200000, observed total counts = 37138.000000
[Wed Dec 28 15:55:32 2011] Offset between fit and detection position for source 5 = 0.072205 pixels
[Wed Dec 28 15:55:32 2011] 37061.010000 total counts/ 7442.410000 bgd. counts: snr = 343.326820
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.072205 pixels
  Position = (282.9, 281.7) = 18 49 49.73 -23 50 12.9
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 29618.6 +/- 192.5
  Background counts = 7442.4
  Rate = 0.4 +/- 0.003
[Wed Dec 28 15:55:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:32 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 15:55:32 2011] Source does appear to be extended
[Wed Dec 28 15:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:39:18 2011] Counts = 29618.600000, rescaling region sizes by 3.000000
[Wed Dec 28 17:39:18 2011] XMMSAS src. selection expression = ellipse(24568.048160, 24456.049200, 961.446628, 961.446628, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing source region out to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_src.reg
[Wed Dec 28 17:39:18 2011] Extracting stamp from image fullrun_mos1_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (228, 226) - (338, 337)
[Wed Dec 28 17:39:18 2011] XMMSAS bgd. selection expression = annulus(24568.048160, 24456.049200, 4807.233138, 9614.466277, X, Y) && !ellipse(23757.716644, 16497.634613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24095.778870, 16145.869781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24111.525848, 24092.449463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25161.003174, 25202.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.170000, 23382.708200, 593.676817, 593.676817, 0.000000, X, Y) && !ellipse(25558.739838, 14238.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15722.869186, 19125.453842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14546.098400, 17416.483000, 1791.264052, 971.168028, -0.000000, X, Y) && !ellipse(21047.120200, 17369.333800, 501.412814, 501.412814, 0.000000, X, Y) && !ellipse(23806.539978, 24756.910370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17061.383621, 21954.727402, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5.gif
[Wed Dec 28 17:39:38 2011] Mean detx,y = (167.80, -150.72) 
[Wed Dec 28 17:39:43 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:46:30 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:46:31 2011] Setting source spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 28 17:46:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Dec 28 19:48:47 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:47 2011] Error reading totcts from fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 28 19:48:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:49 2011] Using photon index=1.80, rate=0.448, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5.arf
[Wed Dec 28 19:48:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:49 2011] Updating source flux to 4e-12
[Wed Dec 28 19:48:55 2011] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Dec 28 19:50:11 2011] Reading fit data from xmm0601950101/analysis//spectral/fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_pl.csv
[Wed Dec 28 19:50:11 2011] Spectral fit parameter nH value = 5.05409e+21
[Wed Dec 28 19:50:11 2011] Spectral fit parameter PhoIndex value = 6.46916
[Wed Dec 28 19:50:11 2011] Failed to get F(0.3-8.0) from xmm0601950101/analysis//spectral/fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 19:50:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:50:11 2011] Using Nh = 5.1e+21, photon index=6.47, rate=0.448, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src5.arf
[Wed Dec 28 19:50:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:50:11 2011] Updating source flux to 2.4e-12