[Wed Dec 28 03:42:29 2011] Detection parameters:
  Position = (277.5, 186.1) = 18 49 51.46 -23 57 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.1 +/- 19.3
  Background counts = 72.8
  Rate = 0.004 +/- 0.0004

[Wed Dec 28 03:42:30 2011] Off-axis axis estimate = 8.28'
[Wed Dec 28 05:08:37 2011] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:08:37 2011] Initial guess for spatial extent in simple fitting = 10.57"
[Wed Dec 28 05:08:37 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.874
[Wed Dec 28 05:08:37 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.57"
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 09:12:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Dec 28 09:12:24 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Dec 28 10:28:44 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.391968 pixels away
[Wed Dec 28 10:28:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:44 2011] Assessing source extent using major
[Wed Dec 28 10:28:44 2011] Source does appear to be extended
[Wed Dec 28 10:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:28:44 2011] Source is confused with source 3
[Wed Dec 28 11:13:18 2011] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:13:18 2011] Initial guess for spatial extent in simple fitting = 10.57"
[Wed Dec 28 11:13:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.874
[Wed Dec 28 11:13:18 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.57"
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Dec 28 14:59:40 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Dec 28 15:55:32 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.541089 pixels away
[Wed Dec 28 15:55:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:32 2011] Assessing source extent using major
[Wed Dec 28 15:55:32 2011] Source does appear to be extended
[Wed Dec 28 15:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:39:18 2011] XMMSAS src. selection expression = ellipse(24095.778870, 16145.869781, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing source region out to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18_src.reg
[Wed Dec 28 17:39:18 2011] Extracting stamp from image fullrun_mos1_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (240, 149) - (315, 224)
[Wed Dec 28 17:39:18 2011] XMMSAS bgd. selection expression = annulus(24095.778870, 16145.869781, 1087.500000, 2175.000000, X, Y) && !ellipse(23757.716644, 16497.634613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25558.739838, 14238.671967, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18.gif
[Wed Dec 28 17:49:58 2011] Mean detx,y = (8400.02, -349.20) 
[Wed Dec 28 17:50:02 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:50:45 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:50:45 2011] Setting source spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 28 17:50:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Dec 28 18:29:56 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 18:29:56 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:48 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:48 2011] Error reading totcts from fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 28 19:48:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:50 2011] Using photon index=1.80, rate=0.00356, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src18.arf
[Wed Dec 28 19:48:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:50 2011] Updating source flux to 4.9e-14
[Wed Dec 28 19:48:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting