[Wed Dec 28 03:42:29 2011] Detection parameters:
  Position = (407.5, 225.0) = 18 49 10.21 -23 54 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.3 +/- 17.9
  Background counts = 64.7
  Rate = 0.002 +/- 0.0003

[Wed Dec 28 03:42:30 2011] Off-axis axis estimate = 9.53'
[Wed Dec 28 05:08:37 2011] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:08:37 2011] Initial guess for spatial extent in simple fitting = 11.20"
[Wed Dec 28 05:08:37 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.111
[Wed Dec 28 05:08:37 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 11.20"
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 09:12:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Dec 28 09:12:24 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Dec 28 10:28:44 2011] Spatial fit model total counts = 643.049000, observed total counts = 644.000000
[Wed Dec 28 10:28:44 2011] Offset between fit and detection position for source 14 = 0.199515 pixels
[Wed Dec 28 10:28:44 2011] 643.422800 total counts/ 571.078000 bgd. counts: snr = 3.027329
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.199515 pixels
  Position = (407.4, 224.9) = 18 49 10.27 -23 54 19.6
  Extent = 3.6 (2.9-4.8)", rotation angle = 0
  Source counts = 72.3 +/- 25.4
  Background counts = 571.1
  Rate = 0.001 +/- 0.0004
[Wed Dec 28 10:28:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:28:44 2011] Source does appear to be extended
[Wed Dec 28 10:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 11:13:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:13:18 2011] Initial guess for spatial extent in simple fitting = 3.62"
[Wed Dec 28 11:13:18 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.844
[Wed Dec 28 11:13:18 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 3.62"
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Dec 28 14:59:40 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Dec 28 15:55:32 2011] Spatial fit model total counts = 643.538000, observed total counts = 644.000000
[Wed Dec 28 15:55:32 2011] Offset between fit and detection position for source 14 = 0.001380 pixels
[Wed Dec 28 15:55:32 2011] 643.917100 total counts/ 571.400000 bgd. counts: snr = 3.033684
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.001380 pixels
  Position = (407.4, 224.9) = 18 49 10.27 -23 54 19.6
  Extent = 3.6 (2.9-4.8)", rotation angle = 0
  Source counts = 72.5 +/- 25.4
  Background counts = 571.4
  Rate = 0.001 +/- 0.0004
[Wed Dec 28 15:55:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:32 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 15:55:32 2011] Source does appear to be extended
[Wed Dec 28 15:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:39:18 2011] XMMSAS src. selection expression = ellipse(35392.543600, 19516.779800, 216.108006, 216.108006, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing source region out to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14_src.reg
[Wed Dec 28 17:39:18 2011] Extracting stamp from image fullrun_mos1_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (395, 212) - (420, 237)
[Wed Dec 28 17:39:18 2011] XMMSAS bgd. selection expression = annulus(35392.543600, 19516.779800, 360.180010, 720.360021, X, Y)
[Wed Dec 28 17:39:18 2011] Writing fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14.gif
[Wed Dec 28 17:57:32 2011] Mean detx,y = (4111.95, -11370.61) 
[Wed Dec 28 17:57:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:57:59 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:58:00 2011] Setting source spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Dec 28 17:58:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Dec 28 18:48:52 2011] Not generating rmf since there are only 72 counts
[Wed Dec 28 18:48:52 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:48 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:48 2011] Error reading totcts from fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Dec 28 19:48:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:50 2011] Using photon index=1.80, rate=0.0011, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src14.arf
[Wed Dec 28 19:48:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:50 2011] Updating source flux to 3.3e-14
[Wed Dec 28 19:48:55 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting