[Wed Dec 28 03:42:28 2011] Detection parameters:
  Position = (277.7, 277.5) = 18 49 51.39 -23 50 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.9 +/- 43.7
  Background counts = 76.5
  Rate = 0.003 +/- 0.0008

[Wed Dec 28 03:42:30 2011] Off-axis axis estimate = 2.14'
[Wed Dec 28 05:08:37 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:08:37 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Dec 28 05:08:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.961
[Wed Dec 28 05:08:37 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.50"
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Dec 28 09:12:24 2011] Fit fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Dec 28 09:12:24 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Dec 28 09:12:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Dec 28 09:12:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:28:44 2011] Warning, spatial fit 6 centroid is now closest to src. 5
[Wed Dec 28 10:28:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:28:44 2011] Assessing source extent using major
[Wed Dec 28 10:28:44 2011] Source does appear to be extended
[Wed Dec 28 10:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:28:44 2011] Source is confused with source 5
[Wed Dec 28 11:13:18 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 11:13:18 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Dec 28 11:13:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.961
[Wed Dec 28 11:13:18 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.50"
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Dec 28 14:59:40 2011] fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Dec 28 14:59:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Dec 28 14:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601950101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 15:55:32 2011] Spatial fit model total counts = -5060.310000, observed total counts = 31308.000000
[Wed Dec 28 15:55:32 2011] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Dec 28 15:55:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 15:55:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 15:55:32 2011] Assessing source extent using major
[Wed Dec 28 15:55:32 2011] Source does appear to be extended
[Wed Dec 28 15:55:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:39:18 2011] XMMSAS src. selection expression = ellipse(24111.525848, 24092.449463, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing source region out to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10_src.reg
[Wed Dec 28 17:39:18 2011] Extracting stamp from image fullrun_mos1_xmm0601950101_pi300-10000_cl_sm2.00.img.gz, (240, 240) - (315, 315)
[Wed Dec 28 17:39:18 2011] XMMSAS bgd. selection expression = annulus(24111.525848, 24092.449463, 1087.500000, 2175.000000, X, Y) && !ellipse(24568.048160, 24456.049200, 1281.928837, 1281.928837, 0.000000, X, Y) && !ellipse(25161.003174, 25202.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.539978, 24756.910370, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 17:39:18 2011] Writing fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10.gif
[Wed Dec 28 17:51:16 2011] Mean detx,y = (234.89, -74.13) 
[Wed Dec 28 17:51:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:52:18 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:52:18 2011] Setting source spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Dec 28 17:52:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Dec 28 18:30:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 18:30:02 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:48:48 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:48:48 2011] Error reading totcts from fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Dec 28 19:48:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:48:50 2011] Using photon index=1.80, rate=0.00318, arf fullrun_mos1_xmm0601950101_pi300-10000_pass1_cl_src10.arf
[Wed Dec 28 19:48:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:48:50 2011] Updating source flux to 3e-14
[Wed Dec 28 19:48:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting