[Sat Jun 23 11:26:58 2012] Detection parameters:
  Position = (272.9, 285.9) = 21 37 8.37 0 26 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2163.2 +/- 63.1
  Background counts = 311.2
  Rate = 0.02 +/- 0.0006

[Sat Jun 23 11:27:02 2012] Off-axis axis estimate = 2.06'
[Sat Jun 23 11:36:21 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:36:21 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sat Jun 23 11:36:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.815
[Sat Jun 23 11:36:21 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.46"
[Sat Jun 23 13:15:42 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 23 13:15:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7.csv
[Sat Jun 23 13:15:42 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 23 13:15:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7.csv
[Sat Jun 23 13:15:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:15:43 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 23 13:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 23 13:15:43 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 23 13:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 23 13:15:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:33:19 2012] Warning, spatial fit 7 centroid is now closest to src. 3
[Sat Jun 23 14:33:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:33:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:33:19 2012] Assessing source extent using major
[Sat Jun 23 14:33:19 2012] Source does appear to be extended
[Sat Jun 23 14:33:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:33:43 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 14:33:43 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sat Jun 23 14:33:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.815
[Sat Jun 23 14:33:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.46"
[Sat Jun 23 15:52:14 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 23 15:52:14 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 23 15:52:14 2012] Fit fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Jun 23 15:52:15 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 23 15:52:15 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 23 15:52:15 2012] Fit fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun 23 17:16:24 2012] Spatial fit model total counts = 4761.230000, observed total counts = 4360.000000
[Sat Jun 23 17:16:24 2012] Offset between fit and detection position for source 8 = 0.153422 pixels
[Sat Jun 23 17:16:24 2012] 4775.200000 total counts/ 3473.140000 bgd. counts: snr = 22.093771
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.153422 pixels
  Position = (272.9, 285.7) = 21 37 8.35 0 26 48.0
  Extent = 6.5 (6.0-7.0)", rotation angle = 0
  Source counts = 1302.1 +/- 69.1
  Background counts = 3473.1
  Rate = 0.01 +/- 0.0007
[Sat Jun 23 17:16:24 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:16:24 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:16:24 2012] Source does appear to be extended
[Sat Jun 23 17:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:16:48 2012] Counts = 1302.060000, rescaling region sizes by 2.000000
[Sat Jun 23 17:16:48 2012] XMMSAS src. selection expression = ellipse(23697.612380, 24808.466200, 779.961622, 779.961622, 0.000000, X, Y)
[Sat Jun 23 17:16:48 2012] Writing source region out to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun 23 17:16:48 2012] Extracting stamp from image fullrun_pn_xmm0601930501_pi300-10000_cl_sm2.00.img.gz, (228, 241) - (318, 331)
[Sat Jun 23 17:16:48 2012] XMMSAS bgd. selection expression = annulus(23697.612380, 24808.466200, 2599.872075, 5199.744150, X, Y) && !ellipse(25469.477753, 23637.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24181.353000, 20709.079400, 415.712812, 415.712812, 0.000000, X, Y) && !ellipse(19658.344772, 19529.156357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18373.883400, 27914.234000, 440.936813, 347.125610, 218.048042, X, Y) && !ellipse(23503.203200, 27708.674800, 834.720024, 834.720024, 0.000000, X, Y) && !ellipse(24759.881480, 27189.390800, 445.904013, 445.904013, 0.000000, X, Y) && !ellipse(23687.621216, 25773.417542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25559.026581, 25393.320892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19476.353400, 24894.434200, 444.456813, 444.456813, 0.000000, X, Y) && !ellipse(25574.434000, 24711.868600, 650.508819, 650.508819, 0.000000, X, Y) && !ellipse(21544.348816, 24407.829773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.287231, 24128.010925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.591827, 22413.908081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.642400, 21522.033000, 401.904012, 401.904012, 0.000000, X, Y) && !ellipse(20388.821520, 21651.487600, 413.722412, 413.722412, 0.000000, X, Y)
[Sat Jun 23 17:16:48 2012] Writing fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8.gif
[Sat Jun 23 17:31:01 2012] Mean detx,y = (513.21, -384.84) 
[Sat Jun 23 17:31:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 17:32:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 17:32:28 2012] Setting source spectrum file to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 23 17:32:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun 23 21:14:49 2012] Updating aperture counts using extracted products
[Sat Jun 23 21:14:49 2012] Error reading totcts from fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 23 21:14:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:14:51 2012] Using photon index=1.80, rate=0.0132, arf fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8.arf
[Sat Jun 23 21:14:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:14:51 2012] Updating source flux to 3.3e-14
[Sat Jun 23 21:18:42 2012] Reading fit data from xmm0601930501/analysis//spectral/fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_pl.csv
[Sat Jun 23 21:18:42 2012] Spectral fit parameter nH value = 1.17258e+22
[Sat Jun 23 21:18:42 2012] Spectral fit parameter PhoIndex value = 9.5
[Sat Jun 23 21:18:42 2012] Failed to get F(0.3-8.0) from xmm0601930501/analysis//spectral/fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 21:18:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:18:42 2012] Using Nh = 1.2e+22, photon index=9.50, rate=0.0132, arf fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src8.arf
[Sat Jun 23 21:18:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:18:42 2012] Updating source flux to 1.9e-14