[Sat Jun 23 11:26:58 2012] Detection parameters:
  Position = (167.5, 217.9) = 21 37 38.93 0 21 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1000.4 +/- 43.4
  Background counts = 229.5
  Rate = 0.008 +/- 0.0004

[Sat Jun 23 11:27:02 2012] Off-axis axis estimate = 11.15'
[Sat Jun 23 11:36:21 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:36:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 11:36:21 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Sat Jun 23 11:36:21 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.800
[Sat Jun 23 11:36:21 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.00"
[Sat Jun 23 13:15:42 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 23 13:15:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 13:15:42 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 23 13:15:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 13:15:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:15:43 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 23 13:15:43 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 23 13:15:43 2012] Fit fullrun_pn_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jun 23 14:33:19 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.040575 pixels away
[Sat Jun 23 14:33:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:33:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:33:19 2012] Assessing source extent using major
[Sat Jun 23 14:33:19 2012] Source does appear to be extended
[Sat Jun 23 14:33:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:33:43 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 14:33:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 14:33:43 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Sat Jun 23 14:33:43 2012] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.800
[Sat Jun 23 14:33:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.00"
[Sat Jun 23 15:52:14 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 23 15:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 15:52:14 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 23 15:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 15:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 15:52:15 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 23 15:52:15 2012] fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 23 15:52:15 2012] Fit fullrun_pn_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 23 17:16:24 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.055901 pixels away
[Sat Jun 23 17:16:24 2012] Source 4 is offset by -6.221951 and 3.935752 pixels which is larger than
2 X fitted extent = 1.709986 x 1.709986, not incorporating fit results
[Sat Jun 23 17:16:24 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:16:24 2012] Assessing source extent using major
[Sat Jun 23 17:16:24 2012] Source does appear to be extended
[Sat Jun 23 17:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:16:48 2012] Counts = 1000.405762, rescaling region sizes by 2.000000
[Sat Jun 23 17:16:48 2012] XMMSAS src. selection expression = ellipse(14524.702255, 18905.848404, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 23 17:16:48 2012] Writing source region out to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 23 17:16:48 2012] Extracting stamp from image fullrun_pn_xmm0601930501_pi300-10000_cl_sm2.00.img.gz, (93, 143) - (243, 293)
[Sat Jun 23 17:16:48 2012] XMMSAS bgd. selection expression = annulus(14524.702255, 18905.848404, 4350.000000, 8700.000000, X, Y) && !ellipse(23697.612380, 24808.466200, 519.974415, 519.974415, 0.000000, X, Y) && !ellipse(14149.631577, 17623.108170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16220.445581, 24803.496000, 451.854413, 451.854413, 0.000000, X, Y) && !ellipse(19658.344772, 19529.156357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21983.730942, 14790.137482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18373.883400, 27914.234000, 440.936813, 347.125610, 218.048042, X, Y) && !ellipse(23503.203200, 27708.674800, 834.720024, 834.720024, 0.000000, X, Y) && !ellipse(23687.621216, 25773.417542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.748000, 25591.259400, 350.981610, 350.981610, 0.000000, X, Y) && !ellipse(19476.353400, 24894.434200, 444.456813, 444.456813, 0.000000, X, Y) && !ellipse(21544.348816, 24407.829773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.287231, 24128.010925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8905.729675, 22031.962204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.642400, 21522.033000, 401.904012, 401.904012, 0.000000, X, Y) && !ellipse(20388.821520, 21651.487600, 413.722412, 413.722412, 0.000000, X, Y) && !ellipse(10337.627464, 18844.188004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17404.632446, 14321.126556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14072.030380, 11508.424362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22804.608917, 12442.252594, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 17:16:48 2012] Writing fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4.gif
[Sat Jun 23 17:22:37 2012] Mean detx,y = (6513.94, -9614.95) 
[Sat Jun 23 17:22:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 17:25:21 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 17:25:22 2012] Setting source spectrum file to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 17:25:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 23 18:45:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 18:45:50 2012] rmf not generated due to insufficient counts
[Sat Jun 23 21:14:49 2012] Updating aperture counts using extracted products
[Sat Jun 23 21:14:49 2012] Error reading totcts from fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 21:14:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:14:50 2012] Using photon index=1.80, rate=0.00825, arf fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4.arf
[Sat Jun 23 21:14:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:14:50 2012] Updating source flux to 4e-14
[Sat Jun 23 21:17:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 23 21:18:42 2012] xmm0601930501/analysis//spectral/fullrun_pn_xmm0601930501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete