[Sat Jun 23 11:28:05 2012] Detection parameters:
  Position = (178.0, 406.1) = 21 37 35.89 0 35 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1863.5 +/- 54.1
  Background counts = 142.2
  Rate = 0.01 +/- 0.0004

[Sat Jun 23 11:28:07 2012] Off-axis axis estimate = 11.71'
[Sat Jun 23 13:45:52 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:45:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 13:45:52 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Sat Jun 23 13:45:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Sat Jun 23 13:45:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.29"
[Sat Jun 23 14:33:06 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 14:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 14:33:06 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 14:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 14:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:33:07 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 14:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 14:33:07 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 14:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 14:33:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:33:29 2012] Warning, spatial fit 1 centroid is now closest to src. 24
[Sat Jun 23 14:33:29 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:33:29 2012] Assessing source extent using major
[Sat Jun 23 14:33:29 2012] Source does appear to be extended
[Sat Jun 23 14:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 16:20:20 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:20:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 16:20:20 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Sat Jun 23 16:20:20 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Sat Jun 23 16:20:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.29"
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 17:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 17:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 17:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 17:16:11 2012] Fit fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 17:16:35 2012] Spatial fit model total counts = 2661.360000, observed total counts = 2543.000000
[Sat Jun 23 17:16:35 2012] Offset between fit and detection position for source 3 = 0.016358 pixels
[Sat Jun 23 17:16:35 2012] 2665.820000 total counts/ 1490.120000 bgd. counts: snr = 30.456914
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.016358 pixels
  Position = (178.0, 406.1) = 21 37 35.89 0 35 31.9
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1175.7 +/- 51.6
  Background counts = 1490.1
  Rate = 0.01 +/- 0.0005
[Sat Jun 23 17:16:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:16:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:16:35 2012] Source does appear to be extended
[Sat Jun 23 17:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 20:23:22 2012] Counts = 1175.700000, rescaling region sizes by 2.000000
[Sat Jun 23 20:23:22 2012] XMMSAS src. selection expression = ellipse(15437.193400, 35284.869400, 685.610420, 685.610420, 0.000000, X, Y)
[Sat Jun 23 20:23:22 2012] Writing source region out to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 23 20:23:22 2012] Extracting stamp from image fullrun_mos2_xmm0601930501_pi300-10000_cl_sm2.00.img.gz, (139, 367) - (217, 446)
[Sat Jun 23 20:23:22 2012] XMMSAS bgd. selection expression = annulus(15437.193400, 35284.869400, 2285.368066, 4570.736132, X, Y) && !ellipse(19344.799088, 36262.798431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17031.363205, 33239.739594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.924881, 39993.125214, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 20:23:22 2012] Writing fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3.gif
[Sat Jun 23 20:23:29 2012] Mean detx,y = (-12210.29, -5833.73) 
[Sat Jun 23 20:23:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 20:24:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 20:24:06 2012] Setting source spectrum file to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 20:24:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 23 21:14:53 2012] Updating aperture counts using extracted products
[Sat Jun 23 21:14:53 2012] Error reading totcts from fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 21:14:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:14:54 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 21:14:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:14:54 2012] Updating source flux to 2.1e-13
[Sat Jun 23 21:17:14 2012] Reading fit data from xmm0601930501/analysis//spectral/fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jun 23 21:17:14 2012] Spectral fit parameter nH value = 4.34458e+20
[Sat Jun 23 21:17:14 2012] Spectral fit parameter PhoIndex value = 2.03126
[Sat Jun 23 21:17:14 2012] Failed to get F(0.3-8.0) from xmm0601930501/analysis//spectral/fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 21:17:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:17:14 2012] Using Nh = 4.3e+20, photon index=2.03, rate=0.0104, arf fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 21:17:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:17:14 2012] Updating source flux to 1.9e-13