[Sat Jun 23 11:28:05 2012] Detection parameters:
  Position = (107.6, 322.9) = 21 37 56.32 0 29 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.2 +/- 23.5
  Background counts = 140.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 23 11:28:07 2012] Off-axis axis estimate = 13.95'
[Sat Jun 23 13:45:52 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:45:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 13:45:52 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Sat Jun 23 13:45:52 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sat Jun 23 13:45:52 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.40"
[Sat Jun 23 14:33:06 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun 23 14:33:06 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun 23 14:33:06 2012] Fit fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_src24 appears to have run properly
[Sat Jun 23 14:33:07 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun 23 14:33:07 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun 23 14:33:07 2012] Fit fullrun_mos2_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sat Jun 23 14:33:29 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.813881 pixels away
[Sat Jun 23 14:33:29 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:33:29 2012] Assessing source extent using major
[Sat Jun 23 14:33:29 2012] Source does appear to be extended
[Sat Jun 23 14:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 16:20:20 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:20:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 16:20:20 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Sat Jun 23 16:20:20 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sat Jun 23 16:20:20 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.40"
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24.ximg exists
[Sat Jun 23 17:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24.csv
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Jun 23 17:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24.csv
[Sat Jun 23 17:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Jun 23 17:16:11 2012] fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jun 23 17:16:11 2012] Fit fullrun_mos2_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Jun 23 17:16:35 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.282972 pixels away
[Sat Jun 23 17:16:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:16:35 2012] Assessing source extent using major
[Sat Jun 23 17:16:35 2012] Source does appear to be extended
[Sat Jun 23 17:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 20:23:22 2012] XMMSAS src. selection expression = ellipse(9308.986809, 28044.712799, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 20:23:22 2012] Writing source region out to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 23 20:23:22 2012] Extracting stamp from image fullrun_mos2_xmm0601930501_pi300-10000_cl_sm2.00.img.gz, (70, 285) - (145, 360)
[Sat Jun 23 20:23:22 2012] XMMSAS bgd. selection expression = annulus(9308.986809, 28044.712799, 1087.500000, 2175.000000, X, Y)
[Sat Jun 23 20:23:22 2012] Writing fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11.gif
[Sat Jun 23 20:32:52 2012] Mean detx,y = (-14803.28, 3279.99) 
[Sat Jun 23 20:32:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 20:33:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 20:33:06 2012] Setting source spectrum file to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 23 20:33:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 23 21:07:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 21:07:20 2012] rmf not generated due to insufficient counts
[Sat Jun 23 21:14:53 2012] Updating aperture counts using extracted products
[Sat Jun 23 21:14:53 2012] Error reading totcts from fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 23 21:14:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:14:54 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0601930501_pi300-10000_pass1_cl_src11.arf
[Sat Jun 23 21:14:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:14:54 2012] Updating source flux to 3.2e-14
[Sat Jun 23 21:15:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting