[Sat Jun 23 11:27:27 2012] Detection parameters:
  Position = (177.9, 406.7) = 21 37 35.91 0 35 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1898.3 +/- 56.9
  Background counts = 158.7
  Rate = 0.02 +/- 0.0005

[Sat Jun 23 11:27:29 2012] Off-axis axis estimate = 11.74'
[Sat Jun 23 13:15:43 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:15:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 13:15:43 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Sat Jun 23 13:15:43 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.948
[Sat Jun 23 13:15:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.30"
[Sat Jun 23 13:45:52 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 13:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 13:45:52 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 13:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 13:45:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:45:52 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 13:45:52 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 13:45:52 2012] Fit fullrun_mos1_xmm0601930501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 14:33:23 2012] Spatial fit model total counts = 2800.000000, observed total counts = 2800.000000
[Sat Jun 23 14:33:23 2012] Offset between fit and detection position for source 4 = 0.214476 pixels
[Sat Jun 23 14:33:23 2012] 2792.200000 total counts/ 1556.340000 bgd. counts: snr = 31.326872
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.214476 pixels
  Position = (177.9, 406.5) = 21 37 35.90 0 35 33.4
  Extent = 6.4 (6.0-6.7)", rotation angle = 0
  Source counts = 1235.9 +/- 52.8
  Background counts = 1556.3
  Rate = 0.01 +/- 0.0005
[Sat Jun 23 14:33:23 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:33:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:33:23 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:33:23 2012] Source does appear to be extended
[Sat Jun 23 14:33:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 15:52:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 15:52:16 2012] Initial guess for spatial extent in simple fitting = 6.35"
[Sat Jun 23 15:52:16 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.780
[Sat Jun 23 15:52:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.35"
[Sat Jun 23 16:20:20 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 16:20:20 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 16:20:20 2012] Fit fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 23 16:20:20 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 16:20:20 2012] fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 16:20:20 2012] Fit fullrun_mos1_xmm0601930501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 17:16:28 2012] Spatial fit model total counts = 2079.000000, observed total counts = 2079.000000
[Sat Jun 23 17:16:28 2012] Offset between fit and detection position for source 4 = 0.005987 pixels
[Sat Jun 23 17:16:28 2012] 2076.422000 total counts/ 884.442000 bgd. counts: snr = 40.080607
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005987 pixels
  Position = (177.9, 406.5) = 21 37 35.91 0 35 33.4
  Extent = 6.1 (5.8-6.4)", rotation angle = 0
  Source counts = 1192.0 +/- 45.6
  Background counts = 884.4
  Rate = 0.01 +/- 0.0004
[Sat Jun 23 17:16:28 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:16:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:16:28 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:16:28 2012] Source does appear to be extended
[Sat Jun 23 17:16:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 19:52:20 2012] Counts = 1191.980000, rescaling region sizes by 2.000000
[Sat Jun 23 19:52:20 2012] XMMSAS src. selection expression = ellipse(15432.430780, 35314.914200, 735.386421, 735.386421, 0.000000, X, Y)
[Sat Jun 23 19:52:20 2012] Writing source region out to fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 23 19:52:20 2012] Extracting stamp from image fullrun_mos1_xmm0601930501_pi300-10000_cl_sm2.00.img.gz, (136, 364) - (220, 449)
[Sat Jun 23 19:52:20 2012] XMMSAS bgd. selection expression = annulus(15432.430780, 35314.914200, 2451.288071, 4902.576141, X, Y) && !ellipse(19341.505524, 36249.703827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18870.227200, 39999.088200, 415.896812, 415.896812, 0.000000, X, Y)
[Sat Jun 23 19:52:20 2012] Writing fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4.gif
[Sat Jun 23 19:52:26 2012] Mean detx,y = (-5715.46, 12033.84) 
[Sat Jun 23 19:52:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 19:52:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 19:52:51 2012] Setting source spectrum file to fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 19:52:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 23 21:14:52 2012] Updating aperture counts using extracted products
[Sat Jun 23 21:14:52 2012] Error reading totcts from fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 21:14:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:14:52 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4.arf
[Sat Jun 23 21:14:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:14:52 2012] Updating source flux to 2e-13
[Sat Jun 23 21:15:43 2012] Reading fit data from xmm0601930501/analysis//spectral/fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_pl.csv
[Sat Jun 23 21:15:43 2012] Spectral fit parameter nH value = 2.41782e+20
[Sat Jun 23 21:15:43 2012] Spectral fit parameter PhoIndex value = 2.20882
[Sat Jun 23 21:15:43 2012] Failed to get F(0.3-8.0) from xmm0601930501/analysis//spectral/fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 21:15:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 21:15:43 2012] Using Nh = 2.4e+20, photon index=2.21, rate=0.0106, arf fullrun_mos1_xmm0601930501_pi300-10000_pass1_cl_src4.arf
[Sat Jun 23 21:15:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 21:15:43 2012] Updating source flux to 1.8e-13