[Sun Jul 29 19:55:25 2012] Detection parameters:
  Position = (254.7, 244.8) = 3 6 35.97 -9 46 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1119.5 +/- 43.3
  Background counts = 121.4
  Rate = 0.02 +/- 0.0009

[Sun Jul 29 19:55:28 2012] Off-axis axis estimate = 5.02'
[Sun Jul 29 20:00:27 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 20:00:27 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Sun Jul 29 20:00:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Sun Jul 29 20:00:27 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.94"
[Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jul 29 22:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8.csv
[Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jul 29 22:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8.csv
[Sun Jul 29 22:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jul 29 22:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jul 29 22:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 29 22:16:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:11 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.885715 pixels away
[Mon Jul 30 01:39:11 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:11 2012] Assessing source extent using major
[Mon Jul 30 01:39:11 2012] Source does appear to be extended
[Mon Jul 30 01:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:39:45 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 01:39:45 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Mon Jul 30 01:39:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon Jul 30 01:39:45 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.94"
[Mon Jul 30 03:36:40 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul 30 03:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7.csv
[Mon Jul 30 03:36:40 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul 30 03:36:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7.csv
[Mon Jul 30 03:36:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul 30 03:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul 30 03:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jul 30 03:36:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:12:44 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.986990 pixels away
[Mon Jul 30 07:12:44 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:12:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:12:44 2012] Assessing source extent using major
[Mon Jul 30 07:12:44 2012] Source does appear to be extended
[Mon Jul 30 07:12:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 07:13:20 2012] Counts = 1119.540527, rescaling region sizes by 2.000000
[Mon Jul 30 07:13:20 2012] XMMSAS src. selection expression = ellipse(22109.471802, 21250.275116, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 30 07:13:20 2012] Writing source region out to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8_src.reg
[Mon Jul 30 07:13:20 2012] Extracting stamp from image fullrun_pn_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (180, 170) - (330, 320)
[Mon Jul 30 07:13:20 2012] XMMSAS bgd. selection expression = annulus(22109.471802, 21250.275116, 4350.000000, 8700.000000, X, Y) && !ellipse(24345.557400, 24611.263600, 2436.552070, 2436.552070, 0.000000, X, Y) && !ellipse(22016.650650, 24771.297974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25305.617310, 14993.729111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.828350, 24335.625200, 348.743210, 348.743210, 0.000000, X, Y) && !ellipse(28610.913727, 18910.081848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31281.557251, 26727.542145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15082.954025, 30760.250214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25646.183228, 29291.968567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23469.000575, 27429.675151, 407.302206, 342.234468, 1.152018, X, Y) && !ellipse(22862.294739, 25425.815796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25943.541199, 25025.639160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22974.849396, 23725.152710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15698.517233, 23646.680000, 359.179210, 359.179210, 0.000000, X, Y) && !ellipse(25040.661316, 23078.568115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.196289, 23386.732056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.222046, 21352.476486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26607.959625, 21202.707611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29957.526001, 20850.405136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27059.080963, 20514.652786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17380.522125, 20454.898697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29857.983643, 20180.261139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14864.489920, 20046.583800, 405.157612, 405.157612, 0.000000, X, Y) && !ellipse(16191.946400, 19905.857800, 492.123214, 340.386410, 58.662000, X, Y) && !ellipse(23098.406494, 19223.452301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15474.301764, 17433.415016, 603.268423, 350.471584, 33.101326, X, Y) && !ellipse(26484.747681, 15616.117096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.256989, 13992.394104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22773.661896, 13125.342514, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 07:13:20 2012] Writing fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8.gif
[Mon Jul 30 07:35:09 2012] Mean detx,y = (1199.81, -4096.97) 
[Mon Jul 30 07:35:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 07:38:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 07:38:02 2012] Setting source spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 30 07:38:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jul 30 10:04:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 10:04:40 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:37 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:37 2012] Error reading totcts from fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 30 13:49:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:41 2012] Using photon index=1.80, rate=0.0244, arf fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src8.arf
[Mon Jul 30 13:49:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:41 2012] Updating source flux to 6.7e-14
[Mon Jul 30 13:55:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting