[Sun Jul 29 19:55:25 2012] Detection parameters: Position = (470.8, 355.9) = 3 5 32.38 -9 38 37.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 335.6 +/- 26.9 Background counts = 87.6 Rate = 0.005 +/- 0.0004 [Sun Jul 29 19:55:28 2012] Off-axis axis estimate = 13.18' [Sun Jul 29 20:00:27 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting [Sun Jul 29 20:00:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jul 29 20:00:27 2012] Initial guess for spatial extent in simple fitting = 13.02" [Sun Jul 29 20:00:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004 [Sun Jul 29 20:00:27 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.02" [Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4.ximg exists [Sun Jul 29 22:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4.csv [Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4_1.ximg exists [Sun Jul 29 22:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4.csv [Sun Jul 29 22:16:11 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Sun Jul 29 22:16:12 2012] Fit fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Mon Jul 30 01:39:11 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.260568 pixels away [Mon Jul 30 01:39:11 2012] Source 4 is offset by -7.942679 and -4.877310 pixels which is larger than 2 X fitted extent = 1.473738 x 1.473738, not incorporating fit results [Mon Jul 30 01:39:11 2012] Vigneting correction estimate = 1.000000 [Mon Jul 30 01:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 30 01:39:11 2012] Assessing source extent using major [Mon Jul 30 01:39:11 2012] Source does appear to be extended [Mon Jul 30 01:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 30 01:39:45 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting [Mon Jul 30 01:39:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jul 30 01:39:45 2012] Initial guess for spatial extent in simple fitting = 13.02" [Mon Jul 30 01:39:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004 [Mon Jul 30 01:39:45 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.02" [Mon Jul 30 03:36:40 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src4.ximg exists [Mon Jul 30 03:36:40 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src4_1.ximg exists [Mon Jul 30 03:36:40 2012] Fit fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src4 appears to have run properly [Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Mon Jul 30 03:36:41 2012] Fit fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Mon Jul 30 07:12:44 2012] Warning, spatial fit 4 centroid is now closest to src. 41 [Mon Jul 30 07:12:44 2012] Spatial fit model total counts = 1525.250000, observed total counts = 1397.000000 [Mon Jul 30 07:12:44 2012] Offset between fit and detection position for source 4 = 0.329066 pixels [Mon Jul 30 07:12:44 2012] Warning, changing simple spatial fit ID from 4 to 37 [Mon Jul 30 07:12:44 2012] 1549.522000 total counts/ 1434.510000 bgd. counts: snr = 3.036626 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.329066 pixels Position = (470.5, 356.0) = 3 5 32.48 -9 38 37.6 Extent = 3.8 (3.2-4.9)", rotation angle = 0 Source counts = 115.0 +/- 39.4 Background counts = 1434.5 Rate = 0.002 +/- 0.0006 [Mon Jul 30 07:12:44 2012] Vigneting correction estimate = 1.000000 [Mon Jul 30 07:12:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 30 07:12:44 2012] Assessing source extent using major axis lower bound [Mon Jul 30 07:12:44 2012] Source does appear to be extended [Mon Jul 30 07:12:44 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jul 30 07:13:20 2012] XMMSAS src. selection expression = ellipse(40887.188000, 30921.764000, 227.168407, 227.168407, 0.000000, X, Y) [Mon Jul 30 07:13:20 2012] Writing source region out to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_src.reg [Mon Jul 30 07:13:20 2012] Extracting stamp from image fullrun_pn_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (457, 343) - (484, 369) [Mon Jul 30 07:13:20 2012] XMMSAS bgd. selection expression = annulus(40887.188000, 30921.764000, 378.614011, 757.228022, X, Y) && !ellipse(40630.900421, 30259.129364, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jul 30 07:13:20 2012] Writing fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4.gif [Mon Jul 30 07:32:10 2012] Mean detx,y = (-13798.32, 10784.91) [Mon Jul 30 07:32:13 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jul 30 07:32:26 2012] Binned source spectrum to 10 counts/bin [Mon Jul 30 07:32:27 2012] Setting source spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jul 30 07:32:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_bgd.pi.gz [Mon Jul 30 13:49:37 2012] Updating aperture counts using extracted products [Mon Jul 30 13:49:37 2012] Error reading totcts from fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jul 30 13:49:41 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jul 30 13:49:41 2012] Using photon index=1.80, rate=0.00179, arf fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4.arf [Mon Jul 30 13:49:41 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jul 30 13:49:41 2012] Updating source flux to 2.7e-14 [Mon Jul 30 13:55:07 2012] Flag b found in src. 4 procflags, skipping spectral fitting [Mon Jul 30 13:58:46 2012] Reading fit data from xmm0601930401/analysis//spectral/fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_pl.csv [Mon Jul 30 13:58:46 2012] Spectral fit parameter nH value = 4.89787e+12 [Mon Jul 30 13:58:46 2012] Spectral fit parameter PhoIndex value = 1.50697 [Mon Jul 30 13:58:46 2012] Failed to get F(0.3-8.0) from xmm0601930401/analysis//spectral/fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected [Mon Jul 30 13:58:46 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jul 30 13:58:46 2012] Using Nh = 4.9e+12, photon index=1.51, rate=0.00179, arf fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src4.arf [Mon Jul 30 13:58:46 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jul 30 13:58:46 2012] Updating source flux to 3.4e-14