[Sun Jul 29 19:55:26 2012] Detection parameters:
  Position = (424.5, 173.9) = 3 5 45.98 -9 51 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.7 +/- 24.3
  Background counts = 99.9
  Rate = 0.003 +/- 0.0004

[Sun Jul 29 19:55:28 2012] Off-axis axis estimate = 12.85'
[Sun Jul 29 20:00:27 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 20:00:27 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sun Jul 29 20:00:27 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.026
[Sun Jul 29 20:00:27 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.85"
[Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 29 22:16:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 22:16:11 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 29 22:16:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 22:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 29 22:16:12 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 29 22:16:12 2012] Fit fullrun_pn_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jul 30 01:39:11 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.690679 pixels away
[Mon Jul 30 01:39:11 2012] Source 23 is offset by 2.665518 and 3.905919 pixels which is larger than
2 X fitted extent = 1.489172 x 1.489172, not incorporating fit results
[Mon Jul 30 01:39:11 2012] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.482328 pixels away
[Mon Jul 30 01:39:11 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:11 2012] Assessing source extent using major
[Mon Jul 30 01:39:11 2012] Source does appear to be extended
[Mon Jul 30 01:39:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 01:39:45 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 01:39:45 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Mon Jul 30 01:39:45 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.026
[Mon Jul 30 01:39:45 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.85"
[Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jul 30 03:36:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21.csv
[Mon Jul 30 03:36:41 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jul 30 03:36:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21.csv
[Mon Jul 30 03:36:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 03:36:42 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jul 30 03:36:42 2012] fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jul 30 03:36:42 2012] Fit fullrun_pn_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Jul 30 07:12:44 2012] Warning, spatial fit 21 centroid is now closest to src. 74
[Mon Jul 30 07:12:44 2012] Source 23 is offset by 2.036576 and 4.703184 pixels which is larger than
2 X fitted extent = 1.486533 x 1.486533, not incorporating fit results
[Mon Jul 30 07:12:44 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.482328 pixels away
[Mon Jul 30 07:12:44 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:12:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:12:44 2012] Assessing source extent using major
[Mon Jul 30 07:12:44 2012] Source does appear to be extended
[Mon Jul 30 07:12:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 07:13:20 2012] XMMSAS src. selection expression = ellipse(36886.478088, 15082.276993, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 07:13:20 2012] Writing source region out to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23_src.reg
[Mon Jul 30 07:13:20 2012] Extracting stamp from image fullrun_pn_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (387, 136) - (462, 211)
[Mon Jul 30 07:13:20 2012] XMMSAS bgd. selection expression = annulus(36886.478088, 15082.276993, 1087.500000, 2175.000000, X, Y) && !ellipse(35704.395325, 13755.850906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37194.134918, 16835.261414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39824.013123, 16225.929535, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 07:13:20 2012] Writing fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23.gif
[Mon Jul 30 07:53:10 2012] Mean detx,y = (-14803.24, -5517.08) 
[Mon Jul 30 07:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 07:53:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 07:53:41 2012] Setting source spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jul 30 07:53:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jul 30 10:17:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 10:17:32 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:38 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:38 2012] Error reading totcts from fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jul 30 13:49:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:41 2012] Using photon index=1.80, rate=0.00343, arf fullrun_pn_xmm0601930401_pi300-10000_pass1_cl_src23.arf
[Mon Jul 30 13:49:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:41 2012] Updating source flux to 2.6e-14
[Mon Jul 30 13:55:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting