[Sun Jul 29 19:56:37 2012] Detection parameters:
  Position = (289.1, 121.6) = 3 6 25.84 -9 55 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.7 +/- 13.1
  Background counts = 24.4
  Rate = 0.001 +/- 0.0002

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 12.84'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sun Jul 29 23:15:35 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 12.85"
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Mon Jul 30 01:38:54 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Mon Jul 30 01:39:28 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 16.867335 pixels away
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Mon Jul 30 04:32:11 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 12.85"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src50.ximg exists
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Jul 30 07:12:22 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src50 appears to have run properly
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Jul 30 07:12:23 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Jul 30 07:13:03 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 16.302070 pixels away
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:30:41 2012] XMMSAS src. selection expression = ellipse(25106.665344, 10533.924400, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 12:30:41 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68_src.reg
[Mon Jul 30 12:30:41 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (252, 84) - (327, 159)
[Mon Jul 30 12:30:41 2012] XMMSAS bgd. selection expression = annulus(25106.665344, 10533.924400, 1087.500000, 2175.000000, X, Y) && !ellipse(23382.438873, 12921.469452, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 12:30:41 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68.gif
[Mon Jul 30 12:57:31 2012] Mean detx,y = (5245.88, 13226.78) 
[Mon Jul 30 12:57:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:57:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:57:50 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Mon Jul 30 12:57:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Mon Jul 30 13:36:57 2012] Not generating rmf since there are only 79 counts
[Mon Jul 30 13:36:57 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:50 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:50 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Mon Jul 30 13:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:53 2012] Using photon index=1.80, rate=0.00121, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src68.arf
[Mon Jul 30 13:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:54 2012] Updating source flux to 3.4e-14
[Mon Jul 30 13:51:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting