[Sun Jul 29 19:56:37 2012] Detection parameters:
  Position = (186.9, 229.2) = 3 6 55.92 -9 47 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.3 +/- 12.4
  Background counts = 22.3
  Rate = 0.0009 +/- 0.0002

[Sun Jul 29 19:56:37 2012] Off-axis axis estimate = 9.52'
[Sun Jul 29 23:15:35 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 23:15:35 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Sun Jul 29 23:15:35 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Sun Jul 29 23:15:35 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 11.19"
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62.csv
[Mon Jul 30 01:38:52 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Jul 30 01:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62.csv
[Mon Jul 30 01:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Jul 30 01:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon Jul 30 01:38:54 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Jul 30 01:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon Jul 30 01:38:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 01:39:28 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.006683 pixels away
[Mon Jul 30 01:39:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 01:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 01:39:28 2012] Assessing source extent using major
[Mon Jul 30 01:39:28 2012] Source does appear to be extended
[Mon Jul 30 01:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 04:32:11 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 04:32:11 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Mon Jul 30 04:32:11 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Mon Jul 30 04:32:11 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 11.19"
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src59.ximg exists
[Mon Jul 30 07:12:22 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Jul 30 07:12:22 2012] Fit fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_src59 appears to have run properly
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Jul 30 07:12:23 2012] fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Jul 30 07:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Jul 30 07:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601930401_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:13:03 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 13.134281 pixels away
[Mon Jul 30 07:13:03 2012] Spatial fit model total counts = 459.590000, observed total counts = 418.000000
[Mon Jul 30 07:13:03 2012] Offset between fit and detection position for source 63 = 0.554281 pixels
[Mon Jul 30 07:13:03 2012] 454.301100 total counts/ 386.740000 bgd. counts: snr = 3.435478
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.554281 pixels
  Position = (187.3, 229.6) = 3 6 55.81 -9 47 47.3
  Extent = 10.3" x 7.5", rotation angle = 289
  Source counts = 67.6 +/- 21.3
  Background counts = 386.7
  Rate = 0.001 +/- 0.0003
[Mon Jul 30 07:13:04 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:13:04 2012] Assessing source extent using major
[Mon Jul 30 07:13:04 2012] Source does appear to be extended
[Mon Jul 30 07:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.37
[Mon Jul 30 12:30:41 2012] XMMSAS src. selection expression = ellipse(16245.798499, 19930.156808, 619.600216, 451.435958, 289.055868, X, Y)
[Mon Jul 30 12:30:41 2012] Writing source region out to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63_src.reg
[Mon Jul 30 12:30:41 2012] Extracting stamp from image fullrun_mos2_xmm0601930401_pi300-10000_cl_sm2.00.img.gz, (152, 194) - (223, 265)
[Mon Jul 30 12:30:41 2012] XMMSAS bgd. selection expression = annulus(16245.798499, 19930.156808, 1032.667027, 2065.334054, X, Y) && !ellipse(14930.567291, 20001.058609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15480.986725, 17459.671204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14168.752000, 23123.638000, 1852.472053, 1852.472053, 0.000000, X, Y)
[Mon Jul 30 12:30:41 2012] Writing fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63.gif
[Mon Jul 30 13:00:57 2012] Mean detx,y = (-6103.95, 7115.81) 
[Mon Jul 30 13:00:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 13:01:26 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 13:01:27 2012] Setting source spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 30 13:01:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon Jul 30 13:41:49 2012] Not generating rmf since there are only 67 counts
[Mon Jul 30 13:41:49 2012] rmf not generated due to insufficient counts
[Mon Jul 30 13:49:51 2012] Updating aperture counts using extracted products
[Mon Jul 30 13:49:51 2012] Error reading totcts from fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 30 13:49:54 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 13:49:54 2012] Using photon index=1.80, rate=0.00102, arf fullrun_mos2_xmm0601930401_pi300-10000_pass1_cl_src63.arf
[Mon Jul 30 13:49:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 13:49:54 2012] Updating source flux to 2e-14
[Mon Jul 30 13:51:52 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting